Knobster DIY

From Sim Innovations Wiki
Jump to navigation Jump to search

It is possible to craete your own knobster using: - An Arduino Nano - A dual rotary encoder with push button - (Optional) some kind of housing

Preparing the Arduino Nano

You can flash the Arduino Nano from Air Manager 3.7: - Go to the create/edit tab - Push the 'Flash' button in the ribbon bar - Select the Arduino Nano, and click 'Next' - Check the COM port of your Arduino Nano - Check the 'Flash as Knobster' option, and click 'Flash'

Arduino Nano pinout

There are fixed pins that should be connected to the appropriate rotary encoder pins.

Rotary encoder pin Arduino pin
Inner encoder A D3
Inner encoder B D3
Outer encoder A D3
Outer encoder B D3
Push button D3