Difference between revisions of "Knobster DIY"

From Sim Innovations Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 12: Line 12:
 
You can flash the Arduino Nano from Air Manager 3.7 or higher for Windows.
 
You can flash the Arduino Nano from Air Manager 3.7 or higher for Windows.
  
Air Manager 3.7
+
Air Manager 4.x
 
* Open up Air Manager
 
* Open up Air Manager
* Go to the Devices tab
+
* Go to the Home tab
 
* Push the 'Flash' button in the ribbon menu
 
* Push the 'Flash' button in the ribbon menu
 
* Select the Arduino Nano, and click 'Next'
 
* Select the Arduino Nano, and click 'Next'
 
* Set the COM port of your Arduino Nano
 
* Set the COM port of your Arduino Nano
 
* Check the 'Flash as Knobster' option
 
* Check the 'Flash as Knobster' option
* Click 'Flash'
+
* Click 'Flash'. The Knobster should now be added to the device list, if not, follow the next 3 steps below.
 +
* After the flashing is done click 'Device' in the ribbon menu
 +
* Select the DIY Knobster and click 'Next'
 +
* Set the COM port of your Arduino Nano and click 'Add'
  
Air Manager 4.x
+
Air Manager 3.7
 
* Open up Air Manager
 
* Open up Air Manager
* Go to the Home tab
+
* Go to the Devices tab
 
* Push the 'Flash' button in the ribbon menu
 
* Push the 'Flash' button in the ribbon menu
 
* Select the Arduino Nano, and click 'Next'
 
* Select the Arduino Nano, and click 'Next'
Line 29: Line 32:
 
* Check the 'Flash as Knobster' option
 
* Check the 'Flash as Knobster' option
 
* Click 'Flash'
 
* Click 'Flash'
* After the flashing is done click 'Device' in the ribbon menu
 
* Select the DIY Knobster and click 'Next'
 
* Set the COM port of your Arduino Nano and click 'Add'
 
  
 
== 2. Connecting the rotary encoder to the Arduino Nano ==
 
== 2. Connecting the rotary encoder to the Arduino Nano ==

Latest revision as of 06:49, 28 April 2021

Info The DIY Knobster only works with Air Manager or Air Player panels. It does not work with KnobXP (VR)


It is possible to create your own knobster using:

  • An Arduino Nano
  • A dual rotary encoder with push button
  • (Optional) some kind of housing

1. Preparing the Arduino Nano

Flash device window

You can flash the Arduino Nano from Air Manager 3.7 or higher for Windows.

Air Manager 4.x

  • Open up Air Manager
  • Go to the Home tab
  • Push the 'Flash' button in the ribbon menu
  • Select the Arduino Nano, and click 'Next'
  • Set the COM port of your Arduino Nano
  • Check the 'Flash as Knobster' option
  • Click 'Flash'. The Knobster should now be added to the device list, if not, follow the next 3 steps below.
  • After the flashing is done click 'Device' in the ribbon menu
  • Select the DIY Knobster and click 'Next'
  • Set the COM port of your Arduino Nano and click 'Add'

Air Manager 3.7

  • Open up Air Manager
  • Go to the Devices tab
  • Push the 'Flash' button in the ribbon menu
  • Select the Arduino Nano, and click 'Next'
  • Set the COM port of your Arduino Nano
  • Check the 'Flash as Knobster' option
  • Click 'Flash'

2. Connecting the rotary encoder to the Arduino Nano

There are fixed pins that should be connected to the appropriate rotary encoder pins.

Rotary encoder pin Arduino Nano pin
Inner encoder A D4
Inner encoder common GND
Inner encoder B D5
Outer encoder A D3
Outer encoder common GND
Outer encoder B D2
Push button D6
Push button common GND