Difference between revisions of "Knobster DIY"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
It is possible to | It is possible to create your own knobster using: | ||
* An Arduino Nano | * An Arduino Nano | ||
* A dual rotary encoder with push button | * A dual rotary encoder with push button |
Revision as of 21:32, 7 November 2019
It is possible to create your own knobster using:
- An Arduino Nano
- A dual rotary encoder with push button
- (Optional) some kind of housing
1. Preparing the Arduino Nano
You can flash the Arduino Nano from Air Manager 3.7 or higher for Windows:
- Open up Air Manager
- Go to the create/edit tab
- Push the 'Flash' button in the ribbon bar
- Select the Arduino Nano, and click 'Next'
- Set the COM port of your Arduino Nano
- Check the 'Flash as Knobster' option
- Click 'Flash'
2. Connecting the rotary encoder to the Arduino Nano
There are fixed pins that should be connected to the appropriate rotary encoder pins.
Rotary encoder pin | Arduino Nano pin |
---|---|
Inner encoder A | D4 |
Inner encoder B | D5 |
Outer encoder A | D3 |
Outer encoder B | D2 |
Push button | D6 |