Difference between revisions of "Knobster DIY"

From Sim Innovations Wiki
Jump to navigation Jump to search
Line 7: Line 7:
 
[[File:air_manager_flash_device_window.png|300px|thumb|Flash device window]]
 
[[File:air_manager_flash_device_window.png|300px|thumb|Flash device window]]
  
You can flash the Arduino Nano from Air Manager 3.7:
+
You can flash the Arduino Nano from Air Manager 3.7 or higher:
* Open up Air Manager 3.7 or higher
+
* Open up Air Manager
 
* Go to the create/edit tab
 
* Go to the create/edit tab
 
* Push the 'Flash' button in the ribbon bar
 
* Push the 'Flash' button in the ribbon bar

Revision as of 09:26, 6 November 2019

It is possible to craete your own knobster using:

  • An Arduino Nano
  • A dual rotary encoder with push button
  • (Optional) some kind of housing

1. Preparing the Arduino Nano

Flash device window

You can flash the Arduino Nano from Air Manager 3.7 or higher:

  • Open up Air Manager
  • Go to the create/edit tab
  • Push the 'Flash' button in the ribbon bar
  • Select the Arduino Nano, and click 'Next'
  • Check the COM port of your Arduino Nano
  • Check the 'Flash as Knobster' option, and click 'Flash'

2. Connecting the rotary encoder to the Arduino Nano

There are fixed pins that should be connected to the appropriate rotary encoder pins.

Rotary encoder pin Arduino pin
Inner encoder A D4
Inner encoder B D5
Outer encoder A D3
Outer encoder B D2
Push button D6