Difference between revisions of "Knobster DIY"
Jump to navigation
Jump to search
Line 7: | Line 7: | ||
You can flash the Arduino Nano from Air Manager 3.7: | You can flash the Arduino Nano from Air Manager 3.7: | ||
Go to the create/edit tab | |||
- Push the 'Flash' button in the ribbon bar | - Push the 'Flash' button in the ribbon bar | ||
- Select the Arduino Nano, and click 'Next' | - Select the Arduino Nano, and click 'Next' |
Revision as of 07:18, 6 November 2019
It is possible to craete your own knobster using: - An Arduino Nano - A dual rotary encoder with push button - (Optional) some kind of housing
Preparing the Arduino Nano
You can flash the Arduino Nano from Air Manager 3.7:
Go to the create/edit tab
- Push the 'Flash' button in the ribbon bar - Select the Arduino Nano, and click 'Next' - Check the COM port of your Arduino Nano - Check the 'Flash as Knobster' option, and click 'Flash'
Arduino Nano pinout
There are fixed pins that should be connected to the appropriate rotary encoder pins.
Rotary encoder pin | Arduino pin |
---|---|
Inner encoder A | D4 |
Inner encoder B | D5 |
Outer encoder A | D3 |
Outer encoder B | D2 |
Push button | D6 |