Difference between revisions of "KnobXP"
Line 67: | Line 67: | ||
<source lang="json"> | <source lang="json"> | ||
{ | { | ||
"name": "LR C172 Ignition key", | "name": "LR C172 Ignition key", | ||
"minor_cw_cmd": "laminar/c172/ignition_up", | "minor_cw_cmd": "laminar/c172/ignition_up", | ||
"minor_ccw_cmd": "laminar/c172/ignition_down", | "minor_ccw_cmd": "laminar/c172/ignition_down", |
Revision as of 13:51, 20 December 2019
KnobXP lets you use the Knobster within X-Plane 11, both in normal mode and VR mode.
Installation
Download the latest KnobXP for Windows here:
Download
1. Unzip the KnobXP folder into \X-Plane 11\Resources\plugins\
2. Start X-Plane and once the aircraft is loaded you will see the KnobXP window with the default modes loaded.
3. When in VR mode, you can position the KnobXP window to a convenient place in your cockpit with your VR controller.
User manual
Control modes
KnobXP comes with a list of pre-defined modes. These modes can be turned on and off from the KnobXP settings window.
In X-Plane go to Plugins -> KnobXP -> Settings and a settings window will turn up, which allows you to turn modes on and off. These settings are stored uniquely for each different aircraft you fly.
Each mode triggers different X-Plane commands. Two examples:
Autopilot heading Outer dial: Autopilot heading up / down Inner dial: Autopilot heading up / down Button: Sync autopilot heading
COM1 frequency 8.33KHz Outer dial: COM1 frequency coarse up / down Inner dial: COM1 frequency fine up / down Button: COM1 standby flip
Active mode
The active mode is visible within the blue box.
Selecting a mode
Selecting a mode can either be done by pointing and clicking with your mouse or VR controller, or by pressing and holding the Knobster button for half a second. When pressing and holding the Knobster button for half a second, KnobXP will go into selection mode, indicated by a green box. When in selection mode, both the inner and outer dial can be used to scroll through the list. Pressing the Knobster button again will select the mode in the green box.
Advanced usage
You can create your own mode with a little Json script. This allows for commands for custom add-on aircraft for example.
Navigate to X-Plane 11\Resources\plugins\KnobXP\modes\ There you will see all the available modes within a Json file. These Json files can be opened with a code editor like Notepad++.
{
"name": "COM1 frequency 8.33KHz",
"minor_cw_cmd": "sim/radios/stby_com1_fine_up_833",
"minor_ccw_cmd": "sim/radios/stby_com1_fine_down_833",
"major_cw_cmd": "sim/radios/stby_com1_coarse_up_833",
"major_ccw_cmd": "sim/radios/stby_com1_coarse_down_833",
"button_released_cmd": "sim/radios/com1_standy_flip",
"order": 301500
}
Create a new Json file based on the same structure to create your own mode, and fill in your desired X-Plane commands.
name The mode name that will show up within X-Plane minor_cw_cmd Inner dial clockwise minor_ccw_cmd Inner dial counter clockwise major_cw_cmd Outer dial clockwise major_ccw_cmd Outer dial counter clockwise order This number determines in what position the mode will show up in the list, the lower the number the higher in the list
Optionally the command appointed to the Knobster button can be forced for a defined number of seconds. This can be useful for a starter engine command for example. In the example below, the starter command is forced for 2 seconds.
{
"name": "LR C172 Ignition key",
"minor_cw_cmd": "laminar/c172/ignition_up",
"minor_ccw_cmd": "laminar/c172/ignition_down",
"major_cw_cmd": "laminar/c172/ignition_up",
"major_ccw_cmd": "laminar/c172/ignition_down",
"button_released_cmd": "sim/starters/engage_starter_1",
"button_released_cmd_force_sec": 2,
"order": 608120
}