This page describes the supported Flight Illusion gauges. Including the supported properties.
Single needle small
Type: SINGLE_NEEDLE_SMALL
Property |
Type |
Settable |
Subscribable |
Units |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle, general range 40-200, depends on instrument. Use at own risk.
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Single needle small with display
Type: SINGLE_NEEDLE_SMALL_WITH_DISPLAY
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle, general range 40-200, depends on instrument. Use at own risk.
|
DISPLAY_TEXT |
String |
✓ |
✘ |
|
Display text
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
|
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
|
Turn display on or off
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Dual needle small with display
Type: DUAL_NEEDLE_SMALL_WITH_DISPLAY
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle, general range 40-200, depends on instrument. Use at own risk.
|
NEEDLE_POS_2 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_2 |
Number |
✓ |
✘ |
|
Speed of needle, general range 40-200, depends on instrument. Use at own risk.
|
DISPLAY_TEXT |
String |
✓ |
✘ |
|
Display text
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
|
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
|
Turn display on or off
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Dual needle excentric small
Type: DUAL_NEEDLE_EXCENTRIC_SMALL
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 1 (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
|
NEEDLE_POS_2 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 2 (between 0.0 and 1.0)
|
NEEDLE_SPEED_2 |
Number |
✓ |
✘ |
|
Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Dual needle concentric small
Type: DUAL_NEEDLE_CONCENTRIC_SMALL
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 1 (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
|
NEEDLE_POS_2 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 2 (between 0.0 and 1.0)
|
NEEDLE_SPEED_2 |
Number |
✓ |
✘ |
|
Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Dual needle excentric large
Type: DUAL_NEEDLE_EXCENTRIC_LARGE
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 1 (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
|
NEEDLE_POS_2 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 2 (between 0.0 and 1.0)
|
NEEDLE_SPEED_2 |
Number |
✓ |
✘ |
|
Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Single needle large
Type: SINGLE_NEEDLE_LARGE
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle, general range 40-200, depends on instrument. Use at own risk.
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Dual needle concentric large
Type: DUAL_NEEDLE_CONCENTRIC_LARGE
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 1 (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
|
NEEDLE_POS_2 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of needle 2 (between 0.0 and 1.0)
|
NEEDLE_SPEED_2 |
Number |
✓ |
✘ |
|
Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Digital altimeter
Type: DIGITAL_ALTIMETER
Property |
Type |
Settable |
Subscribable |
Description
|
ALTITUDE |
Number |
✓ |
✘ |
Altitude (ft).
|
AIR_PRESSURE_MODE |
Number |
✓ |
✘ |
Air pressure mode (0=InHg, 1=HPa)
|
AIR_PRESSURE |
Number |
✓ |
✓ |
Air pressure. Unit depends on AIRPRESSURE_MODE set.
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
true = Display on, false = Display off
|
DISPLAY_INTENSITY_ALTITUDE |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_INTENSITY_PRESSURE |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
DAY_MODE |
String |
✓ |
✘ |
Choose between DAY_TIME and NIGHT_TIME
|
Analogue altimeter
Type: ANALOGUE_ALTIMETER
Property |
Type |
Settable |
Subscribable |
Description
|
ALTITUDE |
Number |
✓ |
✘ |
Absolute altitude (ft).
|
AIR_PRESSURE_MODE |
Number |
✓ |
✘ |
Air pressure mode (0=InHg, 1=HPa)
|
AIR_PRESSURE |
Number |
✓ |
✓ |
Air pressure. Unit depends on AIRPRESSURE_MODE set.
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Attitude indicator
Type: ATTITUDE_INDICATOR
Property |
Type |
Settable |
Subscribable |
Description
|
BANK |
Number |
✓ |
✘ |
Bank (in degrees)
|
PITCH |
Number |
✓ |
✘ |
Pitch (between 1.0 and -1.0)
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Attitude indicator small
Type: ATTITUDE_INDICATOR_SMALL
Property |
Type |
Settable |
Subscribable |
Description
|
BANK |
Number |
✓ |
✘ |
Bank (in degrees)
|
PITCH |
Number |
✓ |
✘ |
Pitch (in degrees)
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Attitude indicator mid
Type: ATTITUDE_INDICATOR_MID
Property |
Type |
Settable |
Subscribable |
Description
|
BANK |
Number |
✓ |
✘ |
Bank (in degrees)
|
PITCH |
Number |
✓ |
✘ |
Pitch (between 1.0 and -1.0)
|
SLIP |
Number |
✓ |
✘ |
Slip (between -1.0 and 1.0)
|
INOP_FLAG |
Boolean |
✓ |
✘ |
Inoperable flag
|
PULL_TO_CAGE |
Boolean |
✘ |
✓ |
Pull to cage (false = idle, true = pulled)
|
STANDBY_BATTERY_TEST |
Boolean |
✘ |
✓ |
Standby battery test
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Boeing clock
Type: BOEING_CLOCK
Property |
Type |
Settable |
Subscribable |
Description
|
DATE_YEAR |
Number |
✓ |
✘ |
Year
|
DATE_MONTH |
Number |
✓ |
✘ |
Month
|
DATE_DAY |
Number |
✓ |
✘ |
Day (0-6 = Sunday-Saturday)
|
REAL_TIME |
Number |
✓ |
✘ |
Time in seconds (0-86399)
|
ELAPSED_TIME |
Number |
✓ |
✘ |
Time in seconds (0-86399)
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Directional gyro
Type: DIRECTIONAL_GYRO
Property |
Type |
Settable |
Subscribable |
Description
|
HEADING |
Number |
✓ |
✘ |
Heading (in degrees)
|
HEADING_DRIFT |
Number |
✘ |
✓ |
Heading drift (in degrees)
|
HEADING_BUG |
Number |
✓ |
✓ |
Heading bug position (in degrees)
|
Wet compass
Type: WET_COMPASS
Property |
Type |
Settable |
Subscribable |
Description
|
HEADING |
Number |
✓ |
✘ |
Heading (in degrees)
|
HEADING_BUG |
Number |
✓ |
✘ |
Heading bug position (in degrees)
|
VOR-1
Type: VOR_1
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position localizer needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of localizer needle, general range 40-200, depends on instrument. Use at own risk.
|
NEEDLE_POS_2 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of glideslope needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_2 |
Number |
✓ |
✘ |
|
Speed of glideslope needle, general range 40-200, depends on instrument. Use at own risk.
|
OBS |
Number |
✘ |
✓ |
|
OBS in degrees
|
FLAG_DISK |
Number |
✓ |
✘ |
|
Set flag disk, 0=none, 1=flag, 2=nav-to gs-flag, 3=nav-from gs-flag, 4=none, 5=nav-flag gs-none, 6=nav-to gs-captured, 7=nav-from gs-captured
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
VOR-2
Type: VOR_2
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
NEEDLE_POS_1 |
Number |
✓ |
✘ |
STEPS, PERCENTAGE |
Position of Localizer needle (between 0.0 and 1.0)
|
NEEDLE_SPEED_1 |
Number |
✓ |
✘ |
|
Speed of localizer needle, general range 40-200, depends on instrument. Use at own risk.
|
OBS |
Number |
✘ |
✓ |
|
OBS in degrees
|
FLAG_DISK |
Number |
✓ |
✘ |
|
Set flag disk, 0=none, 1=flag, 2=to, 3=from
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
ADF directional finder
Type: ADF_DIRECTIONAL_FINDER
Property |
Type |
Settable |
Subscribable |
Description
|
HEADING |
Number |
✘ |
✓ |
Heading (in degrees)
|
DIRECTION |
Number |
✓ |
✘ |
Direction (in degrees)
|
Cessna clock
Type: CESSNA_CLOCK
Property |
Type |
Settable |
Subscribable |
Unit |
Description
|
LOCAL_TIME |
Number |
✓ |
✘ |
|
Set local time, hours only (0-23)
|
UT_TIME |
Number |
✓ |
✘ |
|
Set universal time, in seconds in a day (0-86399)
|
FLIGHT_TIME |
Number |
✓ |
✘ |
|
Set flight time in seconds in a day (0-86399)
|
VOLTAGE |
Number |
✓ |
✘ |
|
Set voltage in V
|
BUZZER |
Boolean |
✓ |
✘ |
|
Enable/disable buzzer
|
TEMP_CELSIUS |
Number |
✓ |
✘ |
|
Set temperature in Celsius
|
TEMP_FAHRENHEIT |
Number |
✓ |
✘ |
|
Set temperature in Fahrenheit
|
SEMICOLON_BLINK |
Boolean |
✓ |
✘ |
|
Enable/disable semicolon blinking
|
LIGHTS |
Number |
✓ |
✘ |
|
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
CL30 COM radio
Type: CL30_COM_RADIO
Property |
Type |
Settable |
Subscribable |
Description
|
ACTIVE_FREQ |
Number |
✘ |
✓ |
Default frequency (in Mhz)
|
STBY_FREQ |
Number |
✘ |
✓ |
Standby frequency (in Mhz)
|
MIN_FREQ |
Number |
✓ |
✘ |
Minimum frequency (in Mhz)
|
MAX_FREQ |
Number |
✓ |
✘ |
Maximum frequency (in Mhz)
|
DEFAULT_FREQ |
Number |
✓ |
✘ |
Default frequency (in Mhz)
|
MODE |
Number |
✘ |
✓ |
Switch mode, 0=OFF, 1=ON, 2=SQ
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
CL30 NAV radio
Type: CL30_NAV_RADIO
Property |
Type |
Settable |
Subscribable |
Description
|
ACTIVE_FREQ |
Number |
✘ |
✓ |
Default frequency (in Mhz)
|
STBY_FREQ |
Number |
✘ |
✓ |
Standby frequency (in Mhz)
|
MIN_FREQ |
Number |
✓ |
✘ |
Minimum frequency (in Mhz)
|
MAX_FREQ |
Number |
✓ |
✘ |
Maximum frequency (in Mhz)
|
DEFAULT_FREQ |
Number |
✓ |
✘ |
Default frequency (in Mhz)
|
MODE |
Number |
✘ |
✓ |
Switch mode, 0=OFF, 1=ON, 2=HLD
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
CL30 ADF radio
Type: CL30_ADF_RADIO
Property |
Type |
Settable |
Subscribable |
Description
|
ACTIVE_FREQ |
Number |
✘ |
✓ |
Default frequency (in KHz)
|
STBY_FREQ |
Number |
✘ |
✓ |
Standby frequency (in KHz)
|
MIN_FREQ |
Number |
✓ |
✘ |
Minimum frequency (in KHz)
|
MAX_FREQ |
Number |
✓ |
✘ |
Maximum frequency (in KHz)
|
DEFAULT_FREQ |
Number |
✓ |
✘ |
Default frequency (in KHz)
|
MODE |
Number |
✘ |
✓ |
Switch mode, 0=ANT, 1=ADF, 2=TONE
|
RANGE_MODE |
Number |
✓ |
✘ |
Select range mode, 0 = Maximum 3 integers (kHz), 1 = Maximum 4 integers (kHz)
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
CTL Transponder
Type: CTL_TRANSPONDER
Property |
Type |
Settable |
Subscribable |
Description
|
CODE_UPPER |
Number |
✓ |
✓ |
Set or get the upper transponder code
|
CODE_LOWER |
Number |
✓ |
✓ |
Set or get lower transponder code
|
MODE |
Number |
✘ |
✓ |
Transponder mode, 0=OFF, 1=STBY, 2=ON, 3=ALT
|
SELECTED_CODE |
Number |
✘ |
✓ |
Selected code, 0=Lower, 1=Upper
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|
Command |
Subscribable |
Fireable |
Description
|
IDT_PRESSED |
✓ |
✘ |
IDT button pressed
|
DME indicator
Type: DME_INDICATOR
Property |
Type |
Settable |
Subscribable |
Description
|
SWITCH_POSITION |
String |
✓ |
✓ |
Switch position, can be "OFF", "N1", "HLD", "N2"
|
SPEED |
String |
✓ |
✘ |
Speed as string (0-9, -, E, H, L P)
|
DISTANCE |
String |
✓ |
✘ |
Distance as string (0-9, -, E, H, L P)
|
TIME |
String |
✓ |
✘ |
Time as string (0-9, -, E, H, L P)
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
Bendix/King COM/NAV radio
Type: BENDIX_KING_COM_NAV_RADIO
Property |
Type |
Settable |
Subscribable |
Description
|
COM_ACTIVE_FREQ |
Number |
✘ |
✓ |
COM default frequency (in Mhz)
|
COM_STBY_FREQ |
Number |
✘ |
✓ |
COM standby frequency (in Mhz)
|
COM_MIN_FREQ |
Number |
✓ |
✘ |
Minimum COM frequency (in Mhz)
|
COM_MAX_FREQ |
Number |
✓ |
✘ |
Maximum COM frequency (in Mhz)
|
COM_DEFAULT_FREQ |
Number |
✓ |
✘ |
Default COM frequency (in Mhz)
|
NAV_ACTIVE_FREQ |
Number |
✘ |
✓ |
NAV default frequency (in Mhz)
|
NAV_STBY_FREQ |
Number |
✘ |
✓ |
NAV standby frequency (in Mhz)
|
NAV_MIN_FREQ |
Number |
✓ |
✘ |
Minimum NAV frequency (in Mhz)
|
NAV_MAX_FREQ |
Number |
✓ |
✘ |
Maximum NAV frequency (in Mhz)
|
NAV_DEFAULT_FREQ |
Number |
✓ |
✘ |
Default NAV frequency (in Mhz)
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
POWER_ON |
Boolean |
✘ |
✓ |
Is the power on switch engaged
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|
Bendix/King ADF radio
Type: BENDIX_KING_ADF_RADIO
Property |
Type |
Settable |
Subscribable |
Description
|
ACTIVE_FREQ |
Number |
✘ |
✓ |
Active frequency (in kHz)
|
STBY_FREQ |
Number |
✘ |
✓ |
Standby frequency (in kHz)
|
MODE |
Number |
✘ |
✓ |
ADF mode, 0=ANT or 1=ADF
|
BFO |
Boolean |
✘ |
✓ |
Is BFO activated
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|
Bendix/King transponder
Type: BENDIX_KING_TRANSPONDER
Property |
Type |
Settable |
Subscribable |
Description
|
CODE |
Number |
✘ |
✓ |
Get transponder code
|
VFR_CODE |
Number |
✓ |
✘ |
Set VFR code
|
MODE |
Number |
✘ |
✓ |
Transponder mode, 0=OFF, 1=STBY, 2=TST, 3=ON, 4=ALT
|
RECEIVE_LED |
Boolean |
✓ |
✘ |
Set receive LED
|
FLIGHT_LEVEL |
Number |
✓ |
✘ |
Set flight level (in ft.)
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|
Command |
Description
|
IDT_PRESSED |
Fired when the IDT button is pressed
|
VFR_PRESSED |
Fired when the VFR button is pressed
|
Bendix/King DME indicator
Type: BENDIX_KING_DME_INDICATOR
Property |
Type |
Settable |
Subscribable |
Description
|
FREQ |
Number |
✘ |
✓ |
Get frequency
|
MODE |
String |
✘ |
✓ |
Switch position, 0=RMT, 1=FREQ, 2=GS/T
|
SPEED |
String |
✓ |
✘ |
Speed as string (0-9, -, E, H, L P)
|
DISTANCE |
String |
✓ |
✘ |
Distance as string (0-9, -, E, H, L P)
|
TIME |
String |
✓ |
✘ |
Time as string (0-9, -, E, H, L P)
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|
Bendix/King autopilot
Type: BENDIX_KING_AUTOPILOT
Property |
Type |
Settable |
Subscribable |
Description
|
AIR_PRESSURE |
Number |
✘ |
✓ |
Air pressure (in InHg or HPa, depending on AIR_PRESSURE_MODE setting)
|
ALTITUDE |
Number |
✘ |
✓ |
Altitude in Ft
|
VERTICAL_SPEED |
Number |
✘ |
✓ |
Vertical speed in ft. per minute
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn the display on/off
|
AP |
Boolean |
✘ |
✓ |
AP Master mode
|
HDG |
Boolean |
✘ |
✓ |
HDG active
|
ROL |
Boolean |
✘ |
✓ |
ROL active
|
NAV |
Boolean |
✘ |
✓ |
NAV active
|
APR |
Boolean |
✘ |
✓ |
APR active
|
ALT |
Boolean |
✘ |
✓ |
ALT active
|
REV |
Boolean |
✘ |
✓ |
REV active
|
AIR_PRESSURE_MODE |
Number |
✓ |
✘ |
Air pressure mode (0=InHg, 1=HPa)
|
DELTA_ALT |
Number |
✓ |
✘ |
Set delta altitude (in ft.)
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Command |
Description
|
AUTOPILOT_OFF |
Turn the autopilot off
|
Bendix/King autopilot II
Type: BENDIX_KING_AUTOPILOT_2
Property |
Type |
Settable |
Subscribable |
Description
|
DISPLAY_TEXT |
String |
✓ |
✘ |
Text on the 6 digit display
|
AP |
Boolean |
✓ |
✘ |
AP Master mode
|
ROL |
Boolean |
✓ |
✘ |
ROL active
|
HDG |
Boolean |
✓ |
✘ |
HDG active
|
ALT |
Boolean |
✓ |
✘ |
ALT active
|
ALT_HLD |
Boolean |
✓ |
✘ |
ALT HOLD active
|
ALT_ARM |
Boolean |
✓ |
✘ |
ALT ARM active
|
VS |
Boolean |
✓ |
✘ |
VS active
|
APR |
Boolean |
✓ |
✘ |
APR active
|
APR_ARM |
Boolean |
✓ |
✘ |
APR ARM active
|
REV |
Boolean |
✓ |
✘ |
NAV ARM active
|
NAV |
Boolean |
✓ |
✘ |
NAV active
|
NAV_ARM |
Boolean |
✓ |
✘ |
NAV ARM active
|
PT |
Boolean |
✓ |
✘ |
PT active
|
PT_UP |
Boolean |
✓ |
✘ |
PT UP active
|
PT_DN |
Boolean |
✓ |
✘ |
PT DN active
|
ALERT |
Boolean |
✓ |
✘ |
ALERT active
|
FPM |
Boolean |
✓ |
✘ |
FPM active
|
FT |
Boolean |
✓ |
✘ |
FT active
|
INHG |
Boolean |
✓ |
✘ |
INHG active
|
HPA |
Boolean |
✓ |
✘ |
HPA active
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn the display on/off
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Command |
Fireable |
Subscribable |
Description
|
AP |
✓ |
✘ |
AP master button pressed
|
HDG |
✓ |
✘ |
HDG button pressed
|
NAV |
✓ |
✘ |
NAV button pressed
|
APR |
✓ |
✘ |
APR button pressed
|
REV |
✓ |
✘ |
REV button pressed
|
ALT |
✓ |
✘ |
ALT button pressed
|
DN |
✓ |
✘ |
DN button pressed
|
UP |
✓ |
✘ |
UP button pressed
|
ARM |
✓ |
✘ |
ARM button pressed
|
BARO |
✓ |
✘ |
BARO button pressed
|
MAJOR_LEFT |
✓ |
✘ |
Encoder major/outer left
|
MAJOR_RIGHT |
✓ |
✘ |
Encoder major/outer right
|
MINOR_LEFT |
✓ |
✘ |
Encoder minor/inner left
|
MINOR_RIGHT |
✓ |
✘ |
Encoder minor/inner right
|
ENCODER_BUTTON |
✓ |
✘ |
Encoder button pressed
|
Bendix/King audio panel
Type: BENDIX_KING_AUDIO_PANEL
Property |
Type |
Settable |
Subscribable |
Description
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn on/off all LED's on the audio panel
|
SWITCH_POSITION |
Number |
✘ |
✓ |
0=COM3, 1=COM2, 2=COM1, 3=COM12, 4=COM21, 5=TEL
|
OUTER_MARKER |
Boolean |
✓ |
✘ |
Turn on/off outer marker LED
|
MIDDLE_MARKER |
Boolean |
✓ |
✘ |
Turn on/off middle marker LED
|
INNER_MARKER |
Boolean |
✓ |
✘ |
Turn on/off inner marker LED
|
SWITCH_1_ACTIVE |
Boolean |
✘ |
✓ |
Is COM1 switch activated
|
SWITCH_2_ACTIVE |
Boolean |
✘ |
✓ |
Is COM2 switch activated
|
SWITCH_3_ACTIVE |
Boolean |
✘ |
✓ |
Is NAV1 switch activated
|
SWITCH_4_ACTIVE |
Boolean |
✘ |
✓ |
Is NAV2 switch activated
|
SWITCH_5_ACTIVE |
Boolean |
✘ |
✓ |
Is MKR switch activated
|
SWITCH_6_ACTIVE |
Boolean |
✘ |
✓ |
Is ICS switch activated
|
SWITCH_7_ACTIVE |
Boolean |
✘ |
✓ |
Is ADF switch activated
|
SWITCH_8_ACTIVE |
Boolean |
✘ |
✓ |
Is AUX switch activated
|
SWITCH_9_ACTIVE |
Boolean |
✘ |
✓ |
Is DME switch activated
|
SWITCH_10_ACTIVE |
Boolean |
✘ |
✓ |
Is SPR switch activated
|
POWER_ON |
Boolean |
✘ |
✓ |
Is the power on switch engaged
|
Radio magnetic indicator
Type: RADIO_MAGNETIC_INDICATOR
Property |
Type |
Settable |
Subscribable |
Description
|
DISTANCE_1 |
Number |
✓ |
✘ |
Distance 1 in nautical miles
|
DISTANCE_2 |
Number |
✓ |
✘ |
Distance 2 in nautical miles
|
VOR_1_BEARING |
Number |
✓ |
✘ |
VOR 1 bearing in degrees
|
ADF_1_BEARING |
Number |
✓ |
✘ |
ADF 1 bearing in degrees
|
VOR_2_BEARING |
Number |
✓ |
✘ |
VOR 2 bearing in degrees
|
ADF_2_BEARING |
Number |
✓ |
✘ |
ADF 2 bearing in degrees
|
HEADING |
Number |
✓ |
✘ |
Heading in degrees
|
INOP_FLAG |
Boolean |
✓ |
✘ |
Inoperable flag
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|
RMI
Type: RMI
Property |
Type |
Settable |
Subscribable |
Description
|
NEEDLE_POS_ADF |
Number |
✓ |
✘ |
ADF Yellow & Green needle in degrees
|
NEEDLE_POS_VOR_YELLOW |
Number |
✓ |
✘ |
Yellow VOR needle in degrees
|
NEEDLE_POS_VOR_GREEN |
Number |
✓ |
✘ |
Green VOR needle in degrees
|
DISTANCE_LEFT |
String |
✓ |
✘ |
Left distance as string (0-9, -, E, H, L P)
|
DISTANCE_RIGHT |
String |
✓ |
✘ |
Right distance as string (0-9, -, E, H, L P)
|
HEADING |
Number |
✓ |
✘ |
Heading in degrees
|
HEADING_FLAG |
Boolean |
✓ |
✘ |
Heading flag
|
NEEDLE_MODE_YELLOW |
Number |
✘ |
✓ |
Yellow needle mode, 0=ADF, 1=VOR
|
NEEDLE_MODE_GREEN |
Number |
✘ |
✓ |
Green needle mode, 0=ADF, 1=VOR
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
RMI 737
Type: RMI_737
Property |
Type |
Settable |
Subscribable |
Description
|
VOR_1_BEARING |
Number |
✓ |
✘ |
VOR 1 bearing in degrees
|
VOR_1_DISTANCE |
Number |
✓ |
✘ |
VOR 1 distance as string (0-9, -, E, H, L P)
|
ADF_1_BEARING |
Number |
✓ |
✘ |
ADF 1 bearing in degrees
|
ADF_1_DISTANCE |
String |
✓ |
✘ |
ADF 1 distance as string (0-9, -, E, H, L P)
|
VOR_2_BEARING |
Number |
✓ |
✘ |
VOR 2 bearing in degrees
|
VOR_2_DISTANCE |
String |
✓ |
✘ |
VOR 2 distance as string (0-9, -, E, H, L P)
|
ADF_2_BEARING |
Number |
✓ |
✘ |
ADF 2 bearing in degrees
|
ADF_2_DISTANCE |
String |
✓ |
✘ |
ADF 2 distance as string (0-9, -, E, H, L P)
|
HEADING |
Number |
✓ |
✘ |
Heading in degrees
|
HEADING_FLAG |
Boolean |
✓ |
✘ |
Heading flag
|
NEEDLE_1_FLAG |
Boolean |
✓ |
✘ |
Needle 1 flag
|
NEEDLE_2_FLAG |
Boolean |
✓ |
✘ |
Needle 2 flag
|
NEEDLE_1_MODE |
Number |
✘ |
✓ |
Needle 1 mode, 0=ADF, 1=VOR
|
NEEDLE_2_MODE |
Number |
✘ |
✓ |
Needle 2 mode, 0=ADF, 1=VOR
|
LIGHTS |
Number |
✓ |
✘ |
Light intensity (between 0.0 (off) and 1.0 (full brightness))
|
Motorized trimwheel
Type: MOTORIZED_TRIMWHEEL
Property |
Type |
Settable |
Subscribable |
Description
|
POSITION |
Number |
✘ |
✓ |
Read the current trim wheel position
|
MODE |
Number |
✓ |
✘ |
Set stepper motor mode. 0=off, 1=up, 2=down, 3=off, 4=auto (follows POSITION_TARGET)
|
POSITION_TARGET |
Number |
✓ |
✘ |
Set the trim wheel to a position
|
CED 125
Type: CED_125
Property |
Type |
Settable |
Subscribable |
Description
|
RPM |
Integer |
✓ |
✘ |
Set RPM
|
LOAD |
Percentage |
✓ |
✘ |
Set Load. Between 0.0 and 1.0
|
OP |
Percentage |
✓ |
✘ |
Set oil pressure. Between 0.0 and 1.0
|
CT |
Percentage |
✓ |
✘ |
Set cooling fluid temperature. Between 0.0 and 1.0
|
OT |
Percentage |
✓ |
✘ |
Set oil temperature. Between 0.0 and 1.0
|
GT |
Percentage |
✓ |
✘ |
Set gearbox temperature. Between 0.0 and 1.0
|
MASTER_CAUTION |
Boolean |
✓ |
✘ |
Set master caution LED
|
DISPLAY_INTENSITY |
Number |
✓ |
✘ |
Display intensity (between 0.0 (off) and 1.0 (full brightness))
|
DISPLAY_ON |
Boolean |
✓ |
✘ |
Turn display on or off
|