Flight Illusion Gauges

This page describes the supported Flight Illusion gauges. Including the supported properties.

Single needle small

Type: SINGLE_NEEDLE_SMALL

Property	Type	Settable	Subscribable	Units	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle, general range 40-200, depends on instrument. Use at own risk.
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Single needle small with display

Type: SINGLE_NEEDLE_SMALL_WITH_DISPLAY

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle, general range 40-200, depends on instrument. Use at own risk.
DISPLAY_TEXT	String	✓	✘		Display text
DISPLAY_INTENSITY	Number	✓	✘		Display intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘		Turn display on or off
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Dual needle small with display

Type: DUAL_NEEDLE_SMALL_WITH_DISPLAY

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle, general range 40-200, depends on instrument. Use at own risk.
NEEDLE_POS_2	Number	✓	✘	STEPS, PERCENTAGE	Position of needle (between 0.0 and 1.0)
NEEDLE_SPEED_2	Number	✓	✘		Speed of needle, general range 40-200, depends on instrument. Use at own risk.
DISPLAY_TEXT	String	✓	✘		Display text
DISPLAY_INTENSITY	Number	✓	✘		Display intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘		Turn display on or off
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Dual needle excentric small

Type: DUAL_NEEDLE_EXCENTRIC_SMALL

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 1 (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
NEEDLE_POS_2	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 2 (between 0.0 and 1.0)
NEEDLE_SPEED_2	Number	✓	✘		Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Dual needle concentric small

Type: DUAL_NEEDLE_CONCENTRIC_SMALL

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 1 (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
NEEDLE_POS_2	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 2 (between 0.0 and 1.0)
NEEDLE_SPEED_2	Number	✓	✘		Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Dual needle excentric large

Type: DUAL_NEEDLE_EXCENTRIC_LARGE

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 1 (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
NEEDLE_POS_2	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 2 (between 0.0 and 1.0)
NEEDLE_SPEED_2	Number	✓	✘		Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Single needle large

Type: SINGLE_NEEDLE_LARGE

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle, general range 40-200, depends on instrument. Use at own risk.
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Dual needle concentric large

Type: DUAL_NEEDLE_CONCENTRIC_LARGE

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 1 (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of needle 1, general range 40-200, depends on instrument. Use at own risk.
NEEDLE_POS_2	Number	✓	✘	STEPS, PERCENTAGE	Position of needle 2 (between 0.0 and 1.0)
NEEDLE_SPEED_2	Number	✓	✘		Speed of needle 2, general range 40-200, depends on instrument. Use at own risk.
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

Digital altimeter

Type: DIGITAL_ALTIMETER

Property	Type	Settable	Subscribable	Description
ALTITUDE	Number	✓	✘	Altitude (ft).
AIR_PRESSURE_MODE	Number	✓	✘	Air pressure mode (0=InHg, 1=HPa)
AIR_PRESSURE	Number	✓	✓	Air pressure. Unit depends on AIRPRESSURE_MODE set.
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘	true = Display on, false = Display off
DISPLAY_INTENSITY_ALTITUDE	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_INTENSITY_PRESSURE	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))
DAY_MODE	String	✓	✘	Choose between DAY_TIME and NIGHT_TIME

Analogue altimeter

Type: ANALOGUE_ALTIMETER

Property	Type	Settable	Subscribable	Description
ALTITUDE	Number	✓	✘	Absolute altitude (ft).
AIR_PRESSURE_MODE	Number	✓	✘	Air pressure mode (0=InHg, 1=HPa)
AIR_PRESSURE	Number	✓	✓	Air pressure. Unit depends on AIRPRESSURE_MODE set.
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Attitude indicator

Type: ATTITUDE_INDICATOR

Property	Type	Settable	Subscribable	Description
BANK	Number	✓	✘	Bank (in degrees)
PITCH	Number	✓	✘	Pitch (between 1.0 and -1.0)
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Attitude indicator small

Type: ATTITUDE_INDICATOR_SMALL

Property	Type	Settable	Subscribable	Description
BANK	Number	✓	✘	Bank (in degrees)
PITCH	Number	✓	✘	Pitch (in degrees)
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Attitude indicator mid

Type: ATTITUDE_INDICATOR_MID

Property	Type	Settable	Subscribable	Description
BANK	Number	✓	✘	Bank (in degrees)
PITCH	Number	✓	✘	Pitch (between 1.0 and -1.0)
SLIP	Number	✓	✘	Slip (between -1.0 and 1.0)
INOP_FLAG	Boolean	✓	✘	Inoperable flag
PULL_TO_CAGE	Boolean	✘	✓	Pull to cage (false = idle, true = pulled)
STANDBY_BATTERY_TEST	Boolean	✘	✓	Standby battery test
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Boeing clock

Type: BOEING_CLOCK

Property	Type	Settable	Subscribable	Description
DATE_YEAR	Number	✓	✘	Year
DATE_MONTH	Number	✓	✘	Month
DATE_DAY	Number	✓	✘	Day (0-6 = Sunday-Saturday)
REAL_TIME	Number	✓	✘	Time in seconds (0-86399)
ELAPSED_TIME	Number	✓	✘	Time in seconds (0-86399)
DISPLAY_ON	Boolean	✓	✘	Turn display on or off
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Directional gyro

Type: DIRECTIONAL_GYRO

Property	Type	Settable	Subscribable	Description
HEADING	Number	✓	✘	Heading (in degrees)
HEADING_DRIFT	Number	✘	✓	Heading drift (in degrees)
HEADING_BUG	Number	✓	✓	Heading bug position (in degrees)

Wet compass

Type: WET_COMPASS

Property	Type	Settable	Subscribable	Description
HEADING	Number	✓	✘	Heading (in degrees)
HEADING_BUG	Number	✓	✘	Heading bug position (in degrees)

VOR-1

Type: VOR_1

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position localizer needle (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of localizer needle, general range 40-200, depends on instrument. Use at own risk.
NEEDLE_POS_2	Number	✓	✘	STEPS, PERCENTAGE	Position of glideslope needle (between 0.0 and 1.0)
NEEDLE_SPEED_2	Number	✓	✘		Speed of glideslope needle, general range 40-200, depends on instrument. Use at own risk.
OBS	Number	✘	✓		OBS in degrees
FLAG_DISK	Number	✓	✘		Set flag disk, 0=none, 1=flag, 2=nav-to gs-flag, 3=nav-from gs-flag, 4=none, 5=nav-flag gs-none, 6=nav-to gs-captured, 7=nav-from gs-captured
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

VOR-2

Type: VOR_2

Property	Type	Settable	Subscribable	Unit	Description
NEEDLE_POS_1	Number	✓	✘	STEPS, PERCENTAGE	Position of Localizer needle (between 0.0 and 1.0)
NEEDLE_SPEED_1	Number	✓	✘		Speed of localizer needle, general range 40-200, depends on instrument. Use at own risk.
OBS	Number	✘	✓		OBS in degrees
FLAG_DISK	Number	✓	✘		Set flag disk, 0=none, 1=flag, 2=to, 3=from
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

ADF directional finder

Type: ADF_DIRECTIONAL_FINDER

Property	Type	Settable	Subscribable	Description
HEADING	Number	✘	✓	Heading (in degrees)
DIRECTION	Number	✓	✘	Direction (in degrees)

Cessna clock

Type: CESSNA_CLOCK

Property	Type	Settable	Subscribable	Unit	Description
LOCAL_TIME	Number	✓	✘		Set local time, hours only (0-23)
UT_TIME	Number	✓	✘		Set universal time, in seconds in a day (0-86399)
FLIGHT_TIME	Number	✓	✘		Set flight time in seconds in a day (0-86399)
VOLTAGE	Number	✓	✘		Set voltage in V
BUZZER	Boolean	✓	✘		Enable/disable buzzer
TEMP_CELSIUS	Number	✓	✘		Set temperature in Celsius
TEMP_FAHRENHEIT	Number	✓	✘		Set temperature in Fahrenheit
SEMICOLON_BLINK	Boolean	✓	✘		Enable/disable semicolon blinking
LIGHTS	Number	✓	✘		Light intensity (between 0.0 (off) and 1.0 (full brightness))

CL30 COM radio

Type: CL30_COM_RADIO

Property	Type	Settable	Subscribable	Description
ACTIVE_FREQ	Number	✘	✓	Default frequency (in Mhz)
STBY_FREQ	Number	✘	✓	Standby frequency (in Mhz)
MIN_FREQ	Number	✓	✘	Minimum frequency (in Mhz)
MAX_FREQ	Number	✓	✘	Maximum frequency (in Mhz)
DEFAULT_FREQ	Number	✓	✘	Default frequency (in Mhz)
MODE	Number	✘	✓	Switch mode, 0=OFF, 1=ON, 2=SQ
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))

CL30 NAV radio

Type: CL30_NAV_RADIO

Property	Type	Settable	Subscribable	Description
ACTIVE_FREQ	Number	✘	✓	Default frequency (in Mhz)
STBY_FREQ	Number	✘	✓	Standby frequency (in Mhz)
MIN_FREQ	Number	✓	✘	Minimum frequency (in Mhz)
MAX_FREQ	Number	✓	✘	Maximum frequency (in Mhz)
DEFAULT_FREQ	Number	✓	✘	Default frequency (in Mhz)
MODE	Number	✘	✓	Switch mode, 0=OFF, 1=ON, 2=HLD
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))

CL30 ADF radio

Type: CL30_ADF_RADIO

Property	Type	Settable	Subscribable	Description
ACTIVE_FREQ	Number	✘	✓	Default frequency (in KHz)
STBY_FREQ	Number	✘	✓	Standby frequency (in KHz)
MIN_FREQ	Number	✓	✘	Minimum frequency (in KHz)
MAX_FREQ	Number	✓	✘	Maximum frequency (in KHz)
DEFAULT_FREQ	Number	✓	✘	Default frequency (in KHz)
MODE	Number	✘	✓	Switch mode, 0=ANT, 1=ADF, 2=TONE
RANGE_MODE	Number	✓	✘	Select range mode, 0 = Maximum 3 integers (kHz), 1 = Maximum 4 integers (kHz)
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))

CTL Transponder

Type: CTL_TRANSPONDER

Property	Type	Settable	Subscribable	Description
CODE_UPPER	Number	✓	✓	Set or get the upper transponder code
CODE_LOWER	Number	✓	✓	Set or get lower transponder code
MODE	Number	✘	✓	Transponder mode, 0=OFF, 1=STBY, 2=ON, 3=ALT
SELECTED_CODE	Number	✘	✓	Selected code, 0=Lower, 1=Upper
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘	Turn display on or off

Command	Subscribable	Fireable	Description
IDT_PRESSED	✓	✘	IDT button pressed

DME indicator

Type: DME_INDICATOR

Property	Type	Settable	Subscribable	Description
SWITCH_POSITION	String	✓	✓	Switch position, can be "OFF", "N1", "HLD", "N2"
SPEED	String	✓	✘	Speed as string (0-9, -, E, H, L P)
DISTANCE	String	✓	✘	Distance as string (0-9, -, E, H, L P)
TIME	String	✓	✘	Time as string (0-9, -, E, H, L P)
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))

Bendix/King COM/NAV radio

Type: BENDIX_KING_COM_NAV_RADIO

Property	Type	Settable	Subscribable	Description
COM_ACTIVE_FREQ	Number	✘	✓	COM default frequency (in Mhz)
COM_STBY_FREQ	Number	✘	✓	COM standby frequency (in Mhz)
COM_MIN_FREQ	Number	✓	✘	Minimum COM frequency (in Mhz)
COM_MAX_FREQ	Number	✓	✘	Maximum COM frequency (in Mhz)
COM_DEFAULT_FREQ	Number	✓	✘	Default COM frequency (in Mhz)
NAV_ACTIVE_FREQ	Number	✘	✓	NAV default frequency (in Mhz)
NAV_STBY_FREQ	Number	✘	✓	NAV standby frequency (in Mhz)
NAV_MIN_FREQ	Number	✓	✘	Minimum NAV frequency (in Mhz)
NAV_MAX_FREQ	Number	✓	✘	Maximum NAV frequency (in Mhz)
NAV_DEFAULT_FREQ	Number	✓	✘	Default NAV frequency (in Mhz)
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))
POWER_ON	Boolean	✘	✓	Is the power on switch engaged
DISPLAY_ON	Boolean	✓	✘	Turn display on or off

Bendix/King ADF radio

Type: BENDIX_KING_ADF_RADIO

Property	Type	Settable	Subscribable	Description
ACTIVE_FREQ	Number	✘	✓	Active frequency (in kHz)
STBY_FREQ	Number	✘	✓	Standby frequency (in kHz)
MODE	Number	✘	✓	ADF mode, 0=ANT or 1=ADF
BFO	Boolean	✘	✓	Is BFO activated
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘	Turn display on or off

Bendix/King transponder

Type: BENDIX_KING_TRANSPONDER

Property	Type	Settable	Subscribable	Description
CODE	Number	✘	✓	Get transponder code
VFR_CODE	Number	✓	✘	Set VFR code
MODE	Number	✘	✓	Transponder mode, 0=OFF, 1=STBY, 2=TST, 3=ON, 4=ALT
RECEIVE_LED	Boolean	✓	✘	Set receive LED
FLIGHT_LEVEL	Number	✓	✘	Set flight level (in ft.)
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘	Turn display on or off

Command	Subscribable	Fireable	Description
IDT_PRESSED	✓	✘	IDT button pressed
VFR_PRESSED	✓	✘	VFR button pressed

Bendix/King DME indicator

Type: BENDIX_KING_DME_INDICATOR

Property	Type	Settable	Subscribable	Description
FREQ	Number	✘	✓	Get frequency
MODE	String	✘	✓	Switch position, 0=RMT, 1=FREQ, 2=GS/T
SPEED	String	✓	✘	Speed as string (0-9, -, E, H, L P)
DISTANCE	String	✓	✘	Distance as string (0-9, -, E, H, L P)
TIME	String	✓	✘	Time as string (0-9, -, E, H, L P)
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘	Turn display on or off

Bendix/King autopilot

Type: BENDIX_KING_AUTOPILOT

Property	Type	Settable	Subscribable	Description
AIR_PRESSURE	Number	✘	✓	Air pressure (in InHg or HPa, depending on AIR_PRESSURE_MODE setting)
ALTITUDE	Number	✘	✓	Altitude in Ft
VERTICAL_SPEED	Number	✘	✓	Vertical speed in ft. per minute
DISPLAY_ON	Boolean	✓	✘	Turn the display on/off
AP	Boolean	✘	✓	AP Master mode
HDG	Boolean	✘	✓	HDG active
ROL	Boolean	✘	✓	ROL active
NAV	Boolean	✘	✓	NAV active
APR	Boolean	✘	✓	APR active
ALT	Boolean	✘	✓	ALT active
REV	Boolean	✘	✓	REV active
AIR_PRESSURE_MODE	Number	✓	✘	Air pressure mode (0=InHg, 1=HPa)
DELTA_ALT	Number	✓	✘	Set delta altitude (in ft.)
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Command	Subscribable	Fireable	Description
AUTOPILOT_OFF	✘	✓	Turn the autopilot off

Bendix/King autopilot V2

Type: BENDIX_KING_AUTOPILOT_V2

Property	Type	Settable	Subscribable	Description
DISPLAY_TEXT	String	✓	✘	Text on the 6 digit display
AP	Boolean	✓	✘	AP Master mode
ROL	Boolean	✓	✘	ROL active
HDG	Boolean	✓	✘	HDG active
ALT	Boolean	✓	✘	ALT active
ALT_HOLD	Boolean	✓	✘	ALT HOLD active
ALT_ARM	Boolean	✓	✘	ALT ARM active
VS	Boolean	✓	✘	VS active
APR	Boolean	✓	✘	APR active
APR_ARM	Boolean	✓	✘	APR ARM active
REV	Boolean	✓	✘	NAV ARM active
NAV	Boolean	✓	✘	NAV active
NAV_ARM	Boolean	✓	✘	NAV ARM active
PT	Boolean	✓	✘	PT active
PT_UP	Boolean	✓	✘	PT up active
PT_DOWN	Boolean	✓	✘	PT down active
ALERT	Boolean	✓	✘	ALERT active
FPM	Boolean	✓	✘	FPM active
FT	Boolean	✓	✘	FT active
INHG	Boolean	✓	✘	INHG active
HPA	Boolean	✓	✘	HPA active
DISPLAY_ON	Boolean	✓	✘	Turn the display on/off
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Command	Subscribable	Fireable	Description
AP	✓	✘	AP master button pressed
HDG	✓	✘	HDG button pressed
NAV	✓	✘	NAV button pressed
APR	✓	✘	APR button pressed
REV	✓	✘	REV button pressed
ALT	✓	✘	ALT button pressed
DN	✓	✘	DN button pressed
UP	✓	✘	UP button pressed
ARM	✓	✘	ARM button pressed
BARO	✓	✘	BARO button pressed
MAJOR_LEFT	✓	✘	Encoder major/outer left
MAJOR_RIGHT	✓	✘	Encoder major/outer right
MINOR_LEFT	✓	✘	Encoder minor/inner left
MINOR_RIGHT	✓	✘	Encoder minor/inner right
ENCODER_BTN_PRESSED	✓	✘	Encoder button pressed
ENCODER_BTN_RELEASED	✓	✘	Encoder button released

Bendix/King audio panel

Type: BENDIX_KING_AUDIO_PANEL

Property	Type	Settable	Subscribable	Description
DISPLAY_ON	Boolean	✓	✘	Turn on/off all LED's on the audio panel
SWITCH_POSITION	Number	✘	✓	0=COM3, 1=COM2, 2=COM1, 3=COM12, 4=COM21, 5=TEL
OUTER_MARKER	Boolean	✓	✘	Turn on/off outer marker LED
MIDDLE_MARKER	Boolean	✓	✘	Turn on/off middle marker LED
INNER_MARKER	Boolean	✓	✘	Turn on/off inner marker LED
SWITCH_1_ACTIVE	Boolean	✘	✓	Is COM1 switch activated
SWITCH_2_ACTIVE	Boolean	✘	✓	Is COM2 switch activated
SWITCH_3_ACTIVE	Boolean	✘	✓	Is NAV1 switch activated
SWITCH_4_ACTIVE	Boolean	✘	✓	Is NAV2 switch activated
SWITCH_5_ACTIVE	Boolean	✘	✓	Is MKR switch activated
SWITCH_6_ACTIVE	Boolean	✘	✓	Is ICS switch activated
SWITCH_7_ACTIVE	Boolean	✘	✓	Is ADF switch activated
SWITCH_8_ACTIVE	Boolean	✘	✓	Is AUX switch activated
SWITCH_9_ACTIVE	Boolean	✘	✓	Is DME switch activated
SWITCH_10_ACTIVE	Boolean	✘	✓	Is SPR switch activated
POWER_ON	Boolean	✘	✓	Is the power on switch engaged

Radio magnetic indicator

Type: RADIO_MAGNETIC_INDICATOR

Property	Type	Settable	Subscribable	Description
DISTANCE_1	Number	✓	✘	Distance 1 in nautical miles
DISTANCE_2	Number	✓	✘	Distance 2 in nautical miles
VOR_1_BEARING	Number	✓	✘	VOR 1 bearing in degrees
ADF_1_BEARING	Number	✓	✘	ADF 1 bearing in degrees
VOR_2_BEARING	Number	✓	✘	VOR 2 bearing in degrees
ADF_2_BEARING	Number	✓	✘	ADF 2 bearing in degrees
HEADING	Number	✓	✘	Heading in degrees
INOP_FLAG	Boolean	✓	✘	Inoperable flag
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘	Turn display on or off

RMI

Type: RMI

Property	Type	Settable	Subscribable	Description
NEEDLE_POS_ADF	Number	✓	✘	ADF Yellow & Green needle in degrees
NEEDLE_POS_VOR_YELLOW	Number	✓	✘	Yellow VOR needle in degrees
NEEDLE_POS_VOR_GREEN	Number	✓	✘	Green VOR needle in degrees
DISTANCE_LEFT	String	✓	✘	Left distance as string (0-9, -, E, H, L P)
DISTANCE_RIGHT	String	✓	✘	Right distance as string (0-9, -, E, H, L P)
HEADING	Number	✓	✘	Heading in degrees
HEADING_FLAG	Boolean	✓	✘	Heading flag
NEEDLE_MODE_YELLOW	Number	✘	✓	Yellow needle mode, 0=ADF, 1=VOR
NEEDLE_MODE_GREEN	Number	✘	✓	Green needle mode, 0=ADF, 1=VOR
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

RMI 737

Type: RMI_737

Property	Type	Settable	Subscribable	Description
VOR_1_BEARING	Number	✓	✘	VOR 1 bearing in degrees
VOR_1_DISTANCE	Number	✓	✘	VOR 1 distance as string (0-9, -, E, H, L P)
ADF_1_BEARING	Number	✓	✘	ADF 1 bearing in degrees
ADF_1_DISTANCE	String	✓	✘	ADF 1 distance as string (0-9, -, E, H, L P)
VOR_2_BEARING	Number	✓	✘	VOR 2 bearing in degrees
VOR_2_DISTANCE	String	✓	✘	VOR 2 distance as string (0-9, -, E, H, L P)
ADF_2_BEARING	Number	✓	✘	ADF 2 bearing in degrees
ADF_2_DISTANCE	String	✓	✘	ADF 2 distance as string (0-9, -, E, H, L P)
HEADING	Number	✓	✘	Heading in degrees
HEADING_FLAG	Boolean	✓	✘	Heading flag
NEEDLE_1_FLAG	Boolean	✓	✘	Needle 1 flag
NEEDLE_2_FLAG	Boolean	✓	✘	Needle 2 flag
NEEDLE_1_MODE	Number	✘	✓	Needle 1 mode, 0=ADF, 1=VOR
NEEDLE_2_MODE	Number	✘	✓	Needle 2 mode, 0=ADF, 1=VOR
LIGHTS	Number	✓	✘	Light intensity (between 0.0 (off) and 1.0 (full brightness))

Motorized trimwheel

Type: MOTORIZED_TRIMWHEEL

Property	Type	Settable	Subscribable	Description
POSITION	Number	✘	✓	Read the current trim wheel position
MODE	Number	✓	✘	Set stepper motor mode. 0=off, 1=up, 2=down, 3=off, 4=auto (follows POSITION_TARGET)
POSITION_TARGET	Number	✓	✘	Set the trim wheel to a position

CED 125

Type: CED_125

Property	Type	Settable	Subscribable	Description
RPM	Integer	✓	✘	Set RPM
LOAD	Percentage	✓	✘	Set Load. Between 0.0 and 1.0
OP	Percentage	✓	✘	Set oil pressure. Between 0.0 and 1.0
CT	Percentage	✓	✘	Set cooling fluid temperature. Between 0.0 and 1.0
OT	Percentage	✓	✘	Set oil temperature. Between 0.0 and 1.0
GT	Percentage	✓	✘	Set gearbox temperature. Between 0.0 and 1.0
MASTER_CAUTION	Boolean	✓	✘	Set master caution LED
DISPLAY_INTENSITY	Number	✓	✘	Display intensity (between 0.0 (off) and 1.0 (full brightness))
DISPLAY_ON	Boolean	✓	✘	Turn display on or off