Difference between revisions of "Flight Illusion Gauges"
Line 698: | Line 698: | ||
! Property !! Type !! Settable !! Subscribable !! Description | ! Property !! Type !! Settable !! Subscribable !! Description | ||
|- | |- | ||
| '''AIR_PRESSURE''' || Number || {{ | | '''AIR_PRESSURE''' || Number || {{ya}} || {{na}} || Air pressure (in InHg or HPa, depending on AIR_PRESSURE_MODE setting) | ||
|- | |- | ||
| '''ALTITUDE''' || Number || {{ | | '''ALTITUDE''' || Number || {{ya}} || {{na}} || Altitude in Ft | ||
|- | |- | ||
| '''VERTICAL_SPEED''' || Number || {{ | | '''VERTICAL_SPEED''' || Number || {{ya}} || {{na}} || Vertical speed in ft. per minute | ||
|- | |- | ||
| '''DISPLAY_ON''' || Boolean || {{ya}} || {{na}} || Turn the display on/off | | '''DISPLAY_ON''' || Boolean || {{ya}} || {{na}} || Turn the display on/off | ||
|- | |- | ||
| '''AP''' || Boolean || {{ | | '''AP''' || Boolean || {{ya}} || {{na}} || AP Master mode | ||
|- | |- | ||
| '''HDG''' || Boolean || {{ | | '''HDG''' || Boolean || {{ya}} || {{na}} || HDG active | ||
|- | |- | ||
| '''ROL''' || Boolean || {{ | | '''ROL''' || Boolean || {{ya}} || {{na}} || ROL active | ||
|- | |- | ||
| '''NAV''' || Boolean || {{ | | '''NAV''' || Boolean || {{ya}} || {{na}} || NAV active | ||
|- | |- | ||
| '''APR''' || Boolean || {{ | | '''APR''' || Boolean || {{ya}} || {{na}} || APR active | ||
|- | |- | ||
| '''ALT''' || Boolean || {{ | | '''ALT''' || Boolean || {{ya}} || {{na}} || ALT active | ||
|- | |- | ||
| '''REV''' || Boolean || {{ | | '''REV''' || Boolean || {{ya}} || {{na}} || REV active | ||
|- | |- | ||
| '''AIR_PRESSURE_MODE''' || Number || {{ya}} || {{na}} || Air pressure mode (0=InHg, 1=HPa) | | '''AIR_PRESSURE_MODE''' || Number || {{ya}} || {{na}} || Air pressure mode (0=InHg, 1=HPa) | ||
|- | |- | ||
| '''DISPLAY_INTENSITY''' || Number || {{ya}} || {{na}} || Display intensity (between 0.0 (off) and 1.0 (full brightness)) | | '''DISPLAY_INTENSITY''' || Number || {{ya}} || {{na}} || Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
Revision as of 11:45, 14 January 2022
This page describes the supported Flight Illusion gauges. Including the supported properties.
Single needle small
Type: SINGLE_NEEDLE_SMALL
Property | Type | Settable | Subscribable | Units | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle, general range 40-200, depends on instrument. Use at own risk. | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Single needle small with display
Type: SINGLE_NEEDLE_SMALL_WITH_DISPLAY
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle, general range 40-200, depends on instrument. Use at own risk. | |
DISPLAY_TEXT | String | ✓ | ✘ | Display text | |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) | |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Dual needle small with display
Type: DUAL_NEEDLE_SMALL_WITH_DISPLAY
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle, general range 40-200, depends on instrument. Use at own risk. | |
NEEDLE_POS_2 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle (between 0.0 and 1.0) |
NEEDLE_SPEED_2 | Number | ✓ | ✘ | Speed of needle, general range 40-200, depends on instrument. Use at own risk. | |
DISPLAY_TEXT | String | ✓ | ✘ | Display text | |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) | |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Dual needle excentric small
Type: DUAL_NEEDLE_EXCENTRIC_SMALL
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 1 (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle 1, general range 40-200, depends on instrument. Use at own risk. | |
NEEDLE_POS_2 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 2 (between 0.0 and 1.0) |
NEEDLE_SPEED_2 | Number | ✓ | ✘ | Speed of needle 2, general range 40-200, depends on instrument. Use at own risk. | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Dual needle concentric small
Type: DUAL_NEEDLE_CONCENTRIC_SMALL
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 1 (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle 1, general range 40-200, depends on instrument. Use at own risk. | |
NEEDLE_POS_2 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 2 (between 0.0 and 1.0) |
NEEDLE_SPEED_2 | Number | ✓ | ✘ | Speed of needle 2, general range 40-200, depends on instrument. Use at own risk. | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Dual needle excentric large
Type: DUAL_NEEDLE_EXCENTRIC_LARGE
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 1 (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle 1, general range 40-200, depends on instrument. Use at own risk. | |
NEEDLE_POS_2 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 2 (between 0.0 and 1.0) |
NEEDLE_SPEED_2 | Number | ✓ | ✘ | Speed of needle 2, general range 40-200, depends on instrument. Use at own risk. | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Single needle large
Type: SINGLE_NEEDLE_LARGE
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle, general range 40-200, depends on instrument. Use at own risk. | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Dual needle concentric large
Type: DUAL_NEEDLE_CONCENTRIC_LARGE
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 1 (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of needle 1, general range 40-200, depends on instrument. Use at own risk. | |
NEEDLE_POS_2 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of needle 2 (between 0.0 and 1.0) |
NEEDLE_SPEED_2 | Number | ✓ | ✘ | Speed of needle 2, general range 40-200, depends on instrument. Use at own risk. | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Digital altimeter
Type: DIGITAL_ALTIMETER
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
ALTITUDE | Number | ✓ | ✘ | Altitude (ft). |
AIR_PRESSURE_MODE | Number | ✓ | ✘ | Air pressure mode (0=InHg, 1=HPa) |
AIR_PRESSURE | Number | ✓ | ✓ | Air pressure. Unit depends on AIRPRESSURE_MODE set. |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_ON | Boolean | ✓ | ✘ | true = Display on, false = Display off |
DISPLAY_INTENSITY_ALTITUDE | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_INTENSITY_PRESSURE | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
DAY_MODE | String | ✓ | ✘ | Choose between DAY_TIME and NIGHT_TIME |
Analogue altimeter
Type: ANALOGUE_ALTIMETER
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
ALTITUDE | Number | ✓ | ✘ | Absolute altitude (ft). |
AIR_PRESSURE_MODE | Number | ✓ | ✘ | Air pressure mode (0=InHg, 1=HPa) |
AIR_PRESSURE | Number | ✓ | ✓ | Air pressure. Unit depends on AIRPRESSURE_MODE set. |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Attitude indicator
Type: ATTITUDE_INDICATOR
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
BANK | Number | ✓ | ✘ | Bank (in degrees) |
PITCH | Number | ✓ | ✘ | Pitch (between 1.0 and -1.0) |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Attitude indicator small
Type: ATTITUDE_INDICATOR_SMALL
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
BANK | Number | ✓ | ✘ | Bank (in degrees) |
PITCH | Number | ✓ | ✘ | Pitch (in degrees) |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Attitude indicator mid
Type: ATTITUDE_INDICATOR_MID
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
BANK | Number | ✓ | ✘ | Bank (in degrees) |
PITCH | Number | ✓ | ✘ | Pitch (between 1.0 and -1.0) |
SLIP | Number | ✓ | ✘ | Slip (between -1.0 and 1.0) |
INOP_FLAG | Boolean | ✓ | ✘ | Inoperable flag |
PULL_TO_CAGE | Boolean | ✘ | ✓ | Pull to cage (false = idle, true = pulled) |
STANDBY_BATTERY_TEST | Boolean | ✘ | ✓ | Standby battery test |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Boeing clock
Type: BOEING_CLOCK
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
DATE_YEAR | Number | ✓ | ✘ | Year |
DATE_MONTH | Number | ✓ | ✘ | Month |
DATE_DAY | Number | ✓ | ✘ | Day (0-6 = Sunday-Saturday) |
REAL_TIME | Number | ✓ | ✘ | Time in seconds (0-86399) |
ELAPSED_TIME | Number | ✓ | ✘ | Time in seconds (0-86399) |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Directional gyro
Type: DIRECTIONAL_GYRO
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
HEADING | Number | ✓ | ✘ | Heading (in degrees) |
HEADING_DRIFT | Number | ✘ | ✓ | Heading drift (in degrees) |
HEADING_BUG | Number | ✓ | ✓ | Heading bug position (in degrees) |
Wet compass
Type: WET_COMPASS
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
HEADING | Number | ✓ | ✘ | Heading (in degrees) |
HEADING_BUG | Number | ✓ | ✘ | Heading bug position (in degrees) |
VOR-1
Type: VOR_1
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position localizer needle (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of localizer needle, general range 40-200, depends on instrument. Use at own risk. | |
NEEDLE_POS_2 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of glideslope needle (between 0.0 and 1.0) |
NEEDLE_SPEED_2 | Number | ✓ | ✘ | Speed of glideslope needle, general range 40-200, depends on instrument. Use at own risk. | |
OBS | Number | ✘ | ✓ | OBS in degrees | |
FLAG_DISK | Number | ✓ | ✘ | Set flag disk, 0=none, 1=flag, 2=nav-to gs-flag, 3=nav-from gs-flag, 4=none, 5=nav-flag gs-none, 6=nav-to gs-captured, 7=nav-from gs-captured | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
VOR-2
Type: VOR_2
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
NEEDLE_POS_1 | Number | ✓ | ✘ | STEPS, PERCENTAGE | Position of Localizer needle (between 0.0 and 1.0) |
NEEDLE_SPEED_1 | Number | ✓ | ✘ | Speed of localizer needle, general range 40-200, depends on instrument. Use at own risk. | |
OBS | Number | ✘ | ✓ | OBS in degrees | |
FLAG_DISK | Number | ✓ | ✘ | Set flag disk, 0=none, 1=flag, 2=to, 3=from | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
ADF directional finder
Type: ADF_DIRECTIONAL_FINDER
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
HEADING | Number | ✘ | ✓ | Heading (in degrees) |
DIRECTION | Number | ✓ | ✘ | Direction (in degrees) |
Cessna clock
Type: CESSNA_CLOCK
Property | Type | Settable | Subscribable | Unit | Description |
---|---|---|---|---|---|
LOCAL_TIME | Number | ✓ | ✘ | Set local time, hours only (0-23) | |
UT_TIME | Number | ✓ | ✘ | Set universal time, in seconds in a day (0-86399) | |
FLIGHT_TIME | Number | ✓ | ✘ | Set flight time in seconds in a day (0-86399) | |
VOLTAGE | Number | ✓ | ✘ | Set voltage in V | |
BUZZER | Boolean | ✓ | ✘ | Enable/disable buzzer | |
TEMP_CELSIUS | Number | ✓ | ✘ | Set temperature in Celsius | |
TEMP_FAHRENHEIT | Number | ✓ | ✘ | Set temperature in Fahrenheit | |
SEMICOLON_BLINK | Boolean | ✓ | ✘ | Enable/disable semicolon blinking | |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
CL30 COM radio
Type: CL30_COM_RADIO
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
ACTIVE_FREQ | Number | ✘ | ✓ | Default frequency (in Mhz) |
STBY_FREQ | Number | ✘ | ✓ | Standby frequency (in Mhz) |
MIN_FREQ | Number | ✓ | ✘ | Minimum frequency (in Mhz) |
MAX_FREQ | Number | ✓ | ✘ | Maximum frequency (in Mhz) |
DEFAULT_FREQ | Number | ✓ | ✘ | Default frequency (in Mhz) |
MODE | Number | ✘ | ✓ | Switch mode, 0=OFF, 1=ON, 2=SQ |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
CL30 NAV radio
Type: CL30_NAV_RADIO
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
ACTIVE_FREQ | Number | ✘ | ✓ | Default frequency (in Mhz) |
STBY_FREQ | Number | ✘ | ✓ | Standby frequency (in Mhz) |
MIN_FREQ | Number | ✓ | ✘ | Minimum frequency (in Mhz) |
MAX_FREQ | Number | ✓ | ✘ | Maximum frequency (in Mhz) |
DEFAULT_FREQ | Number | ✓ | ✘ | Default frequency (in Mhz) |
MODE | Number | ✘ | ✓ | Switch mode, 0=OFF, 1=ON, 2=HLD |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
CL30 ADF radio
Type: CL30_ADF_RADIO
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
ACTIVE_FREQ | Number | ✘ | ✓ | Default frequency (in KHz) |
STBY_FREQ | Number | ✘ | ✓ | Standby frequency (in KHz) |
MIN_FREQ | Number | ✓ | ✘ | Minimum frequency (in KHz) |
MAX_FREQ | Number | ✓ | ✘ | Maximum frequency (in KHz) |
DEFAULT_FREQ | Number | ✓ | ✘ | Default frequency (in KHz) |
MODE | Number | ✘ | ✓ | Switch mode, 0=ANT, 1=ADF, 2=TONE |
RANGE_MODE | Number | ✓ | ✘ | Select range mode, 0 = Maximum 3 integers (kHz), 1 = Maximum 4 integers (kHz) |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
CTL Transponder
Type: CTL_TRANSPONDER
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
CODE_UPPER | Number | ✓ | ✓ | Set or get the upper transponder code |
CODE_LOWER | Number | ✓ | ✓ | Set or get lower transponder code |
MODE | Number | ✘ | ✓ | Transponder mode, 0=OFF, 1=STBY, 2=ON, 3=ALT |
SELECTED_CODE | Number | ✘ | ✓ | Selected code, 0=Lower, 1=Upper |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |
Command | Description |
---|---|
IDT_PRESSED | Fired when the IDT button is pressed |
DME indicator
Type: DME_INDICATOR
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
SWITCH_POSITION | String | ✓ | ✓ | Switch position, can be "OFF", "N1", "HLD", "N2" |
SPEED | String | ✓ | ✘ | Speed as string (0-9, -, E, H, L P) |
DISTANCE | String | ✓ | ✘ | Distance as string (0-9, -, E, H, L P) |
TIME | String | ✓ | ✘ | Time as string (0-9, -, E, H, L P) |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
Bendix/King COM/NAV radio
Type: BENDIX_KING_COM_NAV_RADIO
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
COM_ACTIVE_FREQ | Number | ✘ | ✓ | COM default frequency (in Mhz) |
COM_STBY_FREQ | Number | ✘ | ✓ | COM standby frequency (in Mhz) |
COM_MIN_FREQ | Number | ✓ | ✘ | Minimum COM frequency (in Mhz) |
COM_MAX_FREQ | Number | ✓ | ✘ | Maximum COM frequency (in Mhz) |
COM_DEFAULT_FREQ | Number | ✓ | ✘ | Default COM frequency (in Mhz) |
NAV_ACTIVE_FREQ | Number | ✘ | ✓ | NAV default frequency (in Mhz) |
NAV_STBY_FREQ | Number | ✘ | ✓ | NAV standby frequency (in Mhz) |
NAV_MIN_FREQ | Number | ✓ | ✘ | Minimum NAV frequency (in Mhz) |
NAV_MAX_FREQ | Number | ✓ | ✘ | Maximum NAV frequency (in Mhz) |
NAV_DEFAULT_FREQ | Number | ✓ | ✘ | Default NAV frequency (in Mhz) |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
POWER_ON | Boolean | ✘ | ✓ | Is the power on switch engaged |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |
Bendix/King ADF radio
Type: BENDIX_KING_ADF_RADIO
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
ACTIVE_FREQ | Number | ✘ | ✓ | Active frequency (in kHz) |
STBY_FREQ | Number | ✘ | ✓ | Standby frequency (in kHz) |
MODE | Number | ✘ | ✓ | ADF mode, 0=ANT or 1=ADF |
BFO | Boolean | ✘ | ✓ | Is BFO activated |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |
Bendix/King transponder
Type: BENDIX_KING_TRANSPONDER
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
CODE | Number | ✘ | ✓ | Get transponder code |
VFR_CODE | Number | ✓ | ✘ | Set VFR code |
MODE | Number | ✘ | ✓ | Transponder mode, 0=OFF, 1=STBY, 2=TST, 3=ON, 4=ALT |
RECEIVE_LED | Boolean | ✓ | ✘ | Set receive LED |
FLIGHT_LEVEL | Number | ✓ | ✘ | Set flight level (in ft.) |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |
Command | Description |
---|---|
IDT_PRESSED | Fired when the IDT button is pressed |
VFR_PRESSED | Fired when the VFR button is pressed |
Bendix/King DME indicator
Type: BENDIX_KING_DME_INDICATOR
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
FREQ | Number | ✘ | ✓ | Get frequency |
MODE | String | ✘ | ✓ | Switch position, 0=RMT, 1=FREQ, 2=GS/T |
SPEED | String | ✓ | ✘ | Speed as string (0-9, -, E, H, L P) |
DISTANCE | String | ✓ | ✘ | Distance as string (0-9, -, E, H, L P) |
TIME | String | ✓ | ✘ | Time as string (0-9, -, E, H, L P) |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |
Bendix/King autopilot
Type: BENDIX_KING_AUTOPILOT
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
AIR_PRESSURE | Number | ✘ | ✓ | Air pressure (in InHg or HPa, depending on AIR_PRESSURE_MODE setting) |
ALTITUDE | Number | ✘ | ✓ | Altitude in Ft |
VERTICAL_SPEED | Number | ✘ | ✓ | Vertical speed in ft. per minute |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn the display on/off |
AP | Boolean | ✘ | ✓ | AP Master mode |
HDG | Boolean | ✘ | ✓ | HDG active |
ROL | Boolean | ✘ | ✓ | ROL active |
NAV | Boolean | ✘ | ✓ | NAV active |
APR | Boolean | ✘ | ✓ | APR active |
ALT | Boolean | ✘ | ✓ | ALT active |
REV | Boolean | ✘ | ✓ | REV active |
AIR_PRESSURE_MODE | Number | ✓ | ✘ | Air pressure mode (0=InHg, 1=HPa) |
DELTA_ALT | Number | ✓ | ✘ | Set delta altitude (in ft.) |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Command | Description |
---|---|
AUTOPILOT_OFF | Turn the autopilot off |
Bendix/King autopilot II
Type: BENDIX_KING_AUTOPILOT_2
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
AIR_PRESSURE | Number | ✓ | ✘ | Air pressure (in InHg or HPa, depending on AIR_PRESSURE_MODE setting) |
ALTITUDE | Number | ✓ | ✘ | Altitude in Ft |
VERTICAL_SPEED | Number | ✓ | ✘ | Vertical speed in ft. per minute |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn the display on/off |
AP | Boolean | ✓ | ✘ | AP Master mode |
HDG | Boolean | ✓ | ✘ | HDG active |
ROL | Boolean | ✓ | ✘ | ROL active |
NAV | Boolean | ✓ | ✘ | NAV active |
APR | Boolean | ✓ | ✘ | APR active |
ALT | Boolean | ✓ | ✘ | ALT active |
REV | Boolean | ✓ | ✘ | REV active |
AIR_PRESSURE_MODE | Number | ✓ | ✘ | Air pressure mode (0=InHg, 1=HPa) |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Bendix/King audio panel
Type: BENDIX_KING_AUDIO_PANEL
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
DISPLAY_ON | Boolean | ✓ | ✘ | Turn on/off all LED's on the audio panel |
SWITCH_POSITION | Number | ✘ | ✓ | 0=COM3, 1=COM2, 2=COM1, 3=COM12, 4=COM21, 5=TEL |
OUTER_MARKER | Boolean | ✓ | ✘ | Turn on/off outer marker LED |
MIDDLE_MARKER | Boolean | ✓ | ✘ | Turn on/off middle marker LED |
INNER_MARKER | Boolean | ✓ | ✘ | Turn on/off inner marker LED |
SWITCH_1_ACTIVE | Boolean | ✘ | ✓ | Is COM1 switch activated |
SWITCH_2_ACTIVE | Boolean | ✘ | ✓ | Is COM2 switch activated |
SWITCH_3_ACTIVE | Boolean | ✘ | ✓ | Is NAV1 switch activated |
SWITCH_4_ACTIVE | Boolean | ✘ | ✓ | Is NAV2 switch activated |
SWITCH_5_ACTIVE | Boolean | ✘ | ✓ | Is MKR switch activated |
SWITCH_6_ACTIVE | Boolean | ✘ | ✓ | Is ICS switch activated |
SWITCH_7_ACTIVE | Boolean | ✘ | ✓ | Is ADF switch activated |
SWITCH_8_ACTIVE | Boolean | ✘ | ✓ | Is AUX switch activated |
SWITCH_9_ACTIVE | Boolean | ✘ | ✓ | Is DME switch activated |
SWITCH_10_ACTIVE | Boolean | ✘ | ✓ | Is SPR switch activated |
POWER_ON | Boolean | ✘ | ✓ | Is the power on switch engaged |
Radio magnetic indicator
Type: RADIO_MAGNETIC_INDICATOR
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
DISTANCE_1 | Number | ✓ | ✘ | Distance 1 in nautical miles |
DISTANCE_2 | Number | ✓ | ✘ | Distance 2 in nautical miles |
VOR_1_BEARING | Number | ✓ | ✘ | VOR 1 bearing in degrees |
ADF_1_BEARING | Number | ✓ | ✘ | ADF 1 bearing in degrees |
VOR_2_BEARING | Number | ✓ | ✘ | VOR 2 bearing in degrees |
ADF_2_BEARING | Number | ✓ | ✘ | ADF 2 bearing in degrees |
HEADING | Number | ✓ | ✘ | Heading in degrees |
INOP_FLAG | Boolean | ✓ | ✘ | Inoperable flag |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |
RMI
Type: RMI
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
NEEDLE_POS_ADF | Number | ✓ | ✘ | ADF Yellow & Green needle in degrees |
NEEDLE_POS_VOR_YELLOW | Number | ✓ | ✘ | Yellow VOR needle in degrees |
NEEDLE_POS_VOR_GREEN | Number | ✓ | ✘ | Green VOR needle in degrees |
DISTANCE_LEFT | String | ✓ | ✘ | Left distance as string (0-9, -, E, H, L P) |
DISTANCE_RIGHT | String | ✓ | ✘ | Right distance as string (0-9, -, E, H, L P) |
HEADING | Number | ✓ | ✘ | Heading in degrees |
HEADING_FLAG | Boolean | ✓ | ✘ | Heading flag |
NEEDLE_MODE_YELLOW | Number | ✘ | ✓ | Yellow needle mode, 0=ADF, 1=VOR |
NEEDLE_MODE_GREEN | Number | ✘ | ✓ | Green needle mode, 0=ADF, 1=VOR |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
RMI 737
Type: RMI_737
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
VOR_1_BEARING | Number | ✓ | ✘ | VOR 1 bearing in degrees |
VOR_1_DISTANCE | Number | ✓ | ✘ | VOR 1 distance as string (0-9, -, E, H, L P) |
ADF_1_BEARING | Number | ✓ | ✘ | ADF 1 bearing in degrees |
ADF_1_DISTANCE | String | ✓ | ✘ | ADF 1 distance as string (0-9, -, E, H, L P) |
VOR_2_BEARING | Number | ✓ | ✘ | VOR 2 bearing in degrees |
VOR_2_DISTANCE | String | ✓ | ✘ | VOR 2 distance as string (0-9, -, E, H, L P) |
ADF_2_BEARING | Number | ✓ | ✘ | ADF 2 bearing in degrees |
ADF_2_DISTANCE | String | ✓ | ✘ | ADF 2 distance as string (0-9, -, E, H, L P) |
HEADING | Number | ✓ | ✘ | Heading in degrees |
HEADING_FLAG | Boolean | ✓ | ✘ | Heading flag |
NEEDLE_1_FLAG | Boolean | ✓ | ✘ | Needle 1 flag |
NEEDLE_2_FLAG | Boolean | ✓ | ✘ | Needle 2 flag |
NEEDLE_1_MODE | Number | ✘ | ✓ | Needle 1 mode, 0=ADF, 1=VOR |
NEEDLE_2_MODE | Number | ✘ | ✓ | Needle 2 mode, 0=ADF, 1=VOR |
LIGHTS | Number | ✓ | ✘ | Light intensity (between 0.0 (off) and 1.0 (full brightness)) |
Motorized trimwheel
Type: MOTORIZED_TRIMWHEEL
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
POSITION | Number | ✘ | ✓ | Read the current trim wheel position |
MODE | Number | ✓ | ✘ | Set stepper motor mode. 0=off, 1=up, 2=down, 3=off, 4=auto (follows POSITION_TARGET) |
POSITION_TARGET | Number | ✓ | ✘ | Set the trim wheel to a position |
CED 125
Type: CED_125
Property | Type | Settable | Subscribable | Description |
---|---|---|---|---|
RPM | Integer | ✓ | ✘ | Set RPM |
LOAD | Percentage | ✓ | ✘ | Set Load. Between 0.0 and 1.0 |
OP | Percentage | ✓ | ✘ | Set oil pressure. Between 0.0 and 1.0 |
CT | Percentage | ✓ | ✘ | Set cooling fluid temperature. Between 0.0 and 1.0 |
OT | Percentage | ✓ | ✘ | Set oil temperature. Between 0.0 and 1.0 |
GT | Percentage | ✓ | ✘ | Set gearbox temperature. Between 0.0 and 1.0 |
MASTER_CAUTION | Boolean | ✓ | ✘ | Set master caution LED |
DISPLAY_INTENSITY | Number | ✓ | ✘ | Display intensity (between 0.0 (off) and 1.0 (full brightness)) |
DISPLAY_ON | Boolean | ✓ | ✘ | Turn display on or off |