Air Player 3.x Raspberry Pi System requirements

From Sim Innovations Wiki
Revision as of 12:58, 18 August 2020 by Admin (talk | contribs)
Jump to navigation Jump to search


Air Player requires a Raspberry Pi 2, 3 or 4. Note that a Pi 3 or 4 is recommended because of performance reasons.

There are some restrictions: - Only the first HDMI port is supported - On the Pi 4, the panel should have the same resolution as the monitor


Air Player on the Raspberry Pi can run up to full HD (1920x1080). However the frame rate will only reach approximately 15 frames per second on full HD. For higher frame rates we recommend to use a screen with a lower resolution.