Difference between revisions of "Air Player 3.x Raspberry Pi System requirements"

From Sim Innovations Wiki
Jump to navigation Jump to search
Line 3: Line 3:
  
 
There are some restrictions:
 
There are some restrictions:
- Only the first HDMI port is supported
+
- Only the first HDMI port is supported
- On the Pi 4, the panel should have the same resolution as the monitor
+
- On the Pi 4, the panel should have the same resolution as the monitor
  
 
== Performance ==
 
== Performance ==
 
Air Player on the Raspberry Pi can run up to full HD (1920x1080). However the frame rate will only reach approximately 15 frames per second on full HD. For higher frame rates we recommend to use a screen with a lower resolution.
 
Air Player on the Raspberry Pi can run up to full HD (1920x1080). However the frame rate will only reach approximately 15 frames per second on full HD. For higher frame rates we recommend to use a screen with a lower resolution.

Revision as of 12:58, 18 August 2020

Hardware

Air Player requires a Raspberry Pi 2, 3 or 4. Note that a Pi 3 or 4 is recommended because of performance reasons.

There are some restrictions:

- Only the first HDMI port is supported
- On the Pi 4, the panel should have the same resolution as the monitor

Performance

Air Player on the Raspberry Pi can run up to full HD (1920x1080). However the frame rate will only reach approximately 15 frames per second on full HD. For higher frame rates we recommend to use a screen with a lower resolution.