Hall sensor
Re: Hall sensor
I guess that was your question? I'm a little confused... Or was it about the hall sensor?
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Hall sensor
Hi,
I thought I was clear,
I WANT TO KNOW WITCH HALL SENSOR IS BEST FOR USE IN AIR MANAGER? Referring to one of the 8 in the #1 post are the best to use in AM.
The "MOTOR DRIVER" is a TB6600 and the motor is a NEMA 17.
The "HALL SENSOR is used to detect motor position.
Keith
Last edited by Keith Baxter on Mon Mar 27, 2023 8:14 pm, edited 1 time in total.
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Hall sensor
Hi,
@Ralph @Corjan
When you have a few moments to spare. Take a look at the build.
I want to make a Air Manager version of this.
https://www.737diysim.com/build-guides- ... -throttle2
Keith
@Ralph @Corjan
When you have a few moments to spare. Take a look at the build.
I want to make a Air Manager version of this.
https://www.737diysim.com/build-guides- ... -throttle2
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Hall sensor
Hi,
Just for interest sake this is 4 x TB6600 drivers connected to an arduino UNO.
The hat is a Stepper Driver Breakout Board, MKS CD V1.0 that saves the UNO.
I would assume the "VID66-06" would handle the driving of the steppers.
Keith
Just for interest sake this is 4 x TB6600 drivers connected to an arduino UNO.
The hat is a Stepper Driver Breakout Board, MKS CD V1.0 that saves the UNO.
I would assume the "VID66-06" would handle the driving of the steppers.
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Hall sensor
Hi,
Love it when I talk to myself...
And then again one could also use one of these if AM allows
https://www.aliexpress.com/item/3301117 ... Redirect=y
Keith
Love it when I talk to myself...
And then again one could also use one of these if AM allows
https://www.aliexpress.com/item/3301117 ... Redirect=y
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
-
- Posts: 5339
- Joined: Thu Jul 27, 2017 12:22 am
Re: Hall sensor
Thanks for sharing Keith in any case, this is how any new product we don't know come into our mind for specific projects, always very useful infosKeith Baxter wrote: ↑Tue Mar 28, 2023 12:15 am Hi,
Love it when I talk to myself...
And then again one could also use one of these if AM allows
https://www.aliexpress.com/item/3301117 ... Redirect=y
Keith
Re: Hall sensor
I have never had a hall sensor in my hands, so I don't think I can give you much useful input. But I would guess that they all give a value from 0 to 1.
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Hall sensor
Hi,
I guess someone is going to be curious and purchase one of each. Hall sensor and closed loop stepper driver that is.
Please let me know how they work with AM.
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
Re: Hall sensor
for hall sensors use -
https://www.aliexpress.com/item/1005003 ... 194ditLo9d
You don't need closed loop but you can easily make it from ANY nema motor with an exposed end shaft and any standard stepper controller.
Using the small opposing polar magnet you can us it one the end of any exposed motor shaft
Karl's designs are great in the plastic way but after that .........
It is not rocket surgery
Enjoy..
https://www.aliexpress.com/item/1005003 ... 194ditLo9d
You don't need closed loop but you can easily make it from ANY nema motor with an exposed end shaft and any standard stepper controller.
Using the small opposing polar magnet you can us it one the end of any exposed motor shaft
Karl's designs are great in the plastic way but after that .........
It is not rocket surgery
Enjoy..
Joe. CISSP, MSc.
-
- Posts: 5339
- Joined: Thu Jul 27, 2017 12:22 am
Re: Hall sensor
I have it in my wish-list, also available by Qty 3 / 4 / 5 and even 12, not already purchased thoughjph wrote: ↑Tue Mar 28, 2023 7:49 am for hall sensors use -
https://www.aliexpress.com/item/1005003 ... 194ditLo9d
AS5600-magnetic-encoder-magnetic-induction-angle-measurement-sensor-module-12bit-high-precision.jpg_Q90.jpg
You don't need closed loop but you can easily make it from ANY nema motor with an exposed end shaft and any standard stepper controller.
Using the small opposing polar magnet you can us it one the end of any exposed motor shaft
Karl's designs are great in the plastic way but after that .........
It is not rocket surgery
Enjoy..