Aspen Attitude reference bars

Questions about deployment and use of Air Manager Instruments

Moderators: russ, Ralph

Post Reply
Message
Author
redfish71
Posts: 1
Joined: Sat Jan 14, 2023 8:14 pm

Aspen Attitude reference bars

#1 Post by redfish71 »

I have the Aspen EFD1000 Premium interface running on the Xplane 12 Baron Using Air Manager V4. The attitude reference bars are set about 3 degrees too high, and it is driving me crazy. I know how to adjust it in my own Baron with an Aspen, but there is no menu system on the Air Manager version. I have also determined that adjusting it on the Baron panel in Xplane does not adjust it on the Aspen in Air Manager, so I'm guessing that it has something to do with the programming of the Air Manager instrument.
Does anybody have any idea on how to adjust this?

Moonpilot
Posts: 41
Joined: Tue Jan 01, 2019 4:37 am
Location: Northern CA

Re: Aspen Attitude reference bars

#2 Post by Moonpilot »

I am running Xplane 11 latest version, and I have been trying to get the bar adjusted too, and the Glide slope appears intermittent, I have tried both with the stock Cessna 172, and also with Carenado Cessna 210 Centurion running realty XP GNS 530W and Realty Expansion Pack, but convinced the bars are out of adjustment, and the Glide slope is intermittent, the Realty XP GNS 530 settings, also has the GPS simulator command accepted, I have tried both ways.

Post Reply