Analog calibration

Latest Information on Sim Innovation's flagship product Air Manager

Moderators: russ, Ralph

Post Reply
Message
Author
bebe100
Posts: 59
Joined: Sat Sep 19, 2020 3:22 pm

Analog calibration

#1 Post by bebe100 »

Hello
I want to know haw to calibrate an analog imput because I use only 90 degrees of the potentiometer
Thanks

User avatar
Ralph
Posts: 7878
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Analog calibration

#2 Post by Ralph »

I guess with calibrate you mean that you want to use for example 0 - 0.5 from the range of 0 - 1, and that this 0.5 has to become 1.

That's just simple mathematics: 1 / 0.5 * adc_value
Or the same result: 2 * adc_value

bebe100
Posts: 59
Joined: Sat Sep 19, 2020 3:22 pm

Re: Analog calibration

#3 Post by bebe100 »

Thx sir

bebe100
Posts: 59
Joined: Sat Sep 19, 2020 3:22 pm

Re: Analog calibration

#4 Post by bebe100 »

Thx now I have a range of 90degrees of the potentiometer starting from the one end.
Another question and thx again.
To move the 0 from potentiometer let's say about 30 degrees?

User avatar
Ralph
Posts: 7878
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Analog calibration

#5 Post by Ralph »

That's again just mathematics :)
Have a good look at the previous one, and you should be able to solve it.

bebe100
Posts: 59
Joined: Sat Sep 19, 2020 3:22 pm

Re: Analog calibration

#6 Post by bebe100 »

Thx for icurangmen

User avatar
Ralph
Posts: 7878
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Analog calibration

#7 Post by Ralph »

If not then let us know.

bebe100
Posts: 59
Joined: Sat Sep 19, 2020 3:22 pm

Re: Analog calibration

#8 Post by bebe100 »

Hello
My throttles are working super fine thanks to you.

And last ❓ this is the cherry on the cake
For ZIBO motorized throttle
I want to use servos from R/C
To activate the servo I need AT in state on+ N1 or SPEED or LEVEL CHANGE in state 1.
THIS IS THE BIG QUESTION FOR ME
ANYWAY THANKS AGAIN

User avatar
Ralph
Posts: 7878
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Analog calibration

#9 Post by Ralph »

I believe that @Keith Baxter was working on something like this?

Post Reply