Is there anyone that has a solid understanding of Flight Illusion hardware and specifically the Bendix transponder along with the G-step program?
Or do I have to contact support at Flight Illusion?
Kirk
Flight Illusion’s Bendix Transponder - wacky
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
In first instance you have to contact Flight Illusion, they have the hardware, we cannot test it.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
I have two other gauges that are running as they should with G-step and the FI controller board.
The transponder is giving me fits. It could be the hardware, it could be the G-step program.
Can I just uninstall the transponder from the G-step configuration and then use air manager with it to see if the G-step app is the problem?
If that is possible does the transponder stay connected to the flight illusion controller board?
Re: Flight Illusion’s Bendix Transponder - wacky
Ah, I was a little confused, because their new application made by us is also named Gstep. I probably have to ask for the version number next time
It's all or nothing for both, so you will have to choose.
It's all or nothing for both, so you will have to choose.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
You can add all of them to Air Manager. You can always go back to the old Gstep if you're not satisfied.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
Air Manager does not even offer the option to calibrate. So no worries there.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am