Not really sure which page you mean. Did you read our wiki?
https://siminnovations.com/wiki/index.p ... t_Illusion
Our wiki is the place for user manuals. Follow it step by step, that's all there is to it.
Flight Illusion’s Bendix Transponder - wacky
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
Yes, that’s the page I was referring to. Not much there.Ralph wrote: ↑Mon Aug 22, 2022 1:10 pm Not really sure which page you mean. Did you read our wiki?
https://siminnovations.com/wiki/index.p ... t_Illusion
Our wiki is the place for user manuals. Follow it step by step, that's all there is to it.
Re: Flight Illusion’s Bendix Transponder - wacky
Not much, but enough. If you follow each step carefully then you're done. It is a very simple process, so it doesn't need much description.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
That’s what I tell all of our interns about how to detail buildings. After 30 years it’s simple for me. For those newbies it takes many hours of instruction and trial and error before they understand the subtleties and concepts of the process.
I may try it. At least I will have the G-step configuration file that I can reload if I have to go back to it.
So you are saying that I just have to connect air manager to the controller board, (I/O, or Interface or Engine cluster).
AM will see the instruments, create the hardware function, and I am done?
Re: Flight Illusion’s Bendix Transponder - wacky
Yes, that's all there is to it, it is almost plug and play.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
Well yes You only have to assign the right gauge script to the right hardware. But that's just a few clicks. It's certainly easier than the old Gstep.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
A few clicks probably if I didn’t have custom gauges for which there are no pre-made scripts.
I have a feeling that my manifold pressure +fuel flow, dual needle gauge will require a script that doesn’t exist.
-
- Posts: 581
- Joined: Mon Sep 07, 2020 8:49 am
Re: Flight Illusion’s Bendix Transponder - wacky
If you need custom gauge scripts then it gets a little difficult if you don't know anything about scripting. Still doable with some effort I think.