Sim Innovations Forums

Been there, done that before. That is the problem with building a simulator. We spend weeks, months, years building and programming then one day all of a sudden the main computer crashes. Then we have to rebuild the computer and hoping we backed up the software to reinstall into the rebuilt computer. Such is life.
Vangyver

I always have 3 complete / staggered system backups as a minimum. My main working directories are also real-time synced (with non over-write) to the NAS and cloud based storage. My NAS is also backed up to a bank of 10TB WD stand alone drives with at least 2 copies of main data on separate physical drives. Hell, even my neighbour has an encrypted physical drive with a recent backup which is updated regularly.

As promised, the (hopefully) latest version that includes the Lvars and with a fine tuning for the Loc

Still untested, as I don't have this addon.

Jacques

Just downloaded V1.30. Also I just received my replacement pico projector today. The one I had started making a fan noise and was still under warranty. Tomorrow I will test V1.30 and let you know test results.
Vangyver

-- Jacques ZAHAR 14 July 2022

DVOR A2A = 134 (From vor 117.00)
DVOR AM = 135 (From vor 117.00)

DVOR A2A = 314 (To vor 117.00)
DVOR AM = 315 (To vor 117.00)

DVOR Switches work perfectly.
Values 0 = switch off
Values 1 = switch on
L:DvorNavSwitch (value of 0=Nav1 Value of 1=Nav2)
L:DvorToFromSwitch (value of 0=To Value of 1=Fr)

Note: Script in Generic - DAVTRON M903 v130.siff comment is still showing V1.2

So it seems to be working?
Great.
As for the 1 degree radial difference, since I use the radial transmitted by the sim, it might be a rounding error.
I’ll have a look at it today.

Here's a v1.40 with rounding using math.floor() instead of math.ceil()

this should solve the problem

Jacques

Downloaded Generic - DAVTRON M903 v140.siff
Results same as V1.3
Copied script from v1.4 and pasted in notepad then searched for math.floor.
Text not found.
It seems to be the same lua script as v1.3
I would have to know where to look to verify script in v1.3 is different than v1.4

Note: Script in Generic - DAVTRON M903 v140.siff "Comment is still showing V1.2"

Oh....Probably rushed the export phase without saving the code before. Sorry
Try this one

PERFECT ! Generic - DAVTRON M903 v140
Matches the A2A DVOR perfectly.

DVOR A2A = 134 (From vor 117.00)
DVOR AM = 134 (From vor 117.00)

DVOR A2A = 314 (To vor 117.00)
DVOR AM = 314 (To vor 117.00)

Thank You So Much. I could never have done this. Hoping you will share with the community gauges also.
Vangyver

PS: If you need any testing with the A2A Cheriokee for anything else keep me in mind as I will be happy to do it.