Hi there
I am starting to try the panel script feature.
I think I have encountered a bug, or at least an unexpected behaviour:
When a panel layout is modified in the panel tab (say for example that one instrument is moved), the new position of each instrument in the panel is not transmitted to the panel you are working on in Create/edit, the initial position is used when the panel is run in create/edit
Any thoughts?
Jacques
panel layout change are not transmitted in Create/Edit mode
panel layout change are not transmitted in Create/Edit mode
My YouTube Chanel on the A320 (Real SOPs by an Airline Pilot IRL):
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
Re: panel layout change are not transmitted in Create/Edit mode
You will have to add your panel layout in the Home tab again to see the changes. They're two separate things. Your panel in the Home tab 'pulls' its configuration from your layout, but once it has been created, it's an entity on its own.
To test your new panel layout, you can run it from the Create/Edit tab, then you'll see live changes.
To test your new panel layout, you can run it from the Create/Edit tab, then you'll see live changes.
Re: panel layout change are not transmitted in Create/Edit mode
Oh and it also works the other way around if you clone from a panel in the home tab.
Re: panel layout change are not transmitted in Create/Edit mode
Sorry but I don’t get it. In the create/edit tab, there is no way to modify the layout of the panel (modify the position of an instrument), AFAIK. It can only be done in the Home tab.
My YouTube Chanel on the A320 (Real SOPs by an Airline Pilot IRL):
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
Re: panel layout change are not transmitted in Create/Edit mode
You can modify the positions. Open the Info window and you'll be able to change the X Y values.