Hi Ralph,
I am using AM since 1 month with 2 Wixamit touch screens and 1 Knobster with the G1000 PFD/MFD frames in
the FS 2020/C172. Changing to BETA27 i can dial eg. the COM knob with the Knobster and i see it wheeling on the screen but the frequency digits didńt change. All other knobs same and all buttons are not responsive. I would be sure that the setup is ok, because it already worked before.
Is that a known issue, or do you have an idea what to do? Do you need more info from me?
Cheers Daniel
checked alle items from mentioned page:
- Firewall: deaktivated, FS and AM started: negativ result
- Same network: FS and AM are running on the same pc, so this does not apply for me
- Plugin: Version 3.8. BETA 4, successful loading of plugin confirmed by log:
14-12-2021 16:19:22 INFO Main: Starting plugin (3.8.4 BETA)...
14-12-2021 16:19:22 INFO Main: Done initializing!
14-12-2021 16:19:22 INFO Main: Serving forever...
14-12-2021 18:28:09 INFO SimConnectHandler: Received SimConnect Open event
14-12-2021 18:28:10 INFO SimBusServer: New client connected on port 55558 (ext. port 63450)
14-12-2021 18:28:10 INFO SimBusServer: New client connected on port 55561 (ext. port 63706)
14-12-2021 18:28:10 INFO SimBusServerProviderPool: Succesfull bind to variable "si/backlight_intensity" with unit "DOUBLE"
14-12-2021 18:28:10 INFO SimBusServerProviderPool: Succesfull bind to variable "TITLE" with unit "string"
14-12-2021 18:28:10 INFO SimBusServerProviderPool: Succesfull bind to variable "LIGHT PANEL" with unit "bool"
14-12-2021 18:28:10 INFO SimBusServerProviderPool: Succesfull bind to variable "LIGHT NAV" with unit "bool"
14-12-2021 18:28:10 INFO SimBusServerProviderPool: Succesfull bind to variable "ELECTRICAL MAIN BUS VOLTAGE" with unit "volts"
14-12-2021 18:28:10 INFO SimRemoteServer: Accepted connection from 192.168.178.48
- Instrument: G1000 Bezel is compatible for FS2020
Instruments remain as described below. I can see the yellow highlighted circle, knobs are rotating, but nothing happens. Pushbuttons are also not responsive.
Using the classic Cessna panel I see that e.g. the Trim Indication, the Flap indicator, Temp correction Airspeed Indicator are moving corresponding to the imput, but:
VOR´s, Altimeter not.
I have no idea, what else can i try?
The plugin is doing fine, so it's a network issue. You can try setting the IP address in Air Manager manually, if it is on the same machine then that's 127.0.0.1
Hello Ralph, I entered the IP address but no changes. Does it make sense to reinstall AM? Or any other suggestions?
To be honest, AM worked before the last update. Do you see a correlation?
No that does not make a difference. The problem is somewhere between the plugin and Air Manager, but it's hard for us to say what it is. If you don't trust the plugin then you can go for the release version instead of the beta. I rather expect the problem somewhere in FS2020 or in the network.
