Install: 1 Failed Target
Install: 1 Failed Target
Search the forums for the subject with no luck. Using Etcher, I attempted to create the boot image of Air Player 3.7 for RPI. It completes but provides a 1 Target Failed. Attempted this on multiple SD cards with the same result. In addition, the boot image does not load/boot on my RPI 3 B v1.2. Please advise.
-
- Posts: 5346
- Joined: Thu Jul 27, 2017 12:22 am
Re: Install: 1 Failed Target
@nupe494
Have to be run in administrator context
also check if not any issue with real time security tool scan having locked balena Etcher, like "Windows Defender" or similar tool
Gilles
Have to be run in administrator context
also check if not any issue with real time security tool scan having locked balena Etcher, like "Windows Defender" or similar tool
Gilles
Re: Install: 1 Failed Target
Or a corrupt SD card? Did you format it before installing the image?
Re: Install: 1 Failed Target
I ended up trying it again on what turned out to be another SSD card I had formatted for something else and I no longer get the error.