LZScout wrote: ↑Thu Mar 13, 2025 1:13 am
Yves, the panels I’m using are unmodified other than changing their names. They are the 1st, 2nd, and 5th panels as shown at the beginning of this thread. And that first panel, which I call the Pilot Panel, is the one I show with no User Properties setting. Should there be a “Development” setting for this panel?
Lantz,
You were right. There was a bug in the A32NX FlyByWire Glareshield Cpt panel that prevents the A32NX version user property.
There is a new version in my Google Drive
is there a way to open the new panels on the iPad Air Manager ? as I wish to use the ipad as an overhead panel, it mostly works but the Air Condition Packs, the Centre Fuel Pumps do not work properly, and all the FLT CTL buttons indicate that they are off on the iPad but the are on in the sim, I suspect this is because of the updates but I could be wrong - any solution towards a fully functioning overhead for the A32X on an iPad would be awesome.
mach.8 wrote: ↑Thu Mar 27, 2025 11:18 am
is there a way to open the new panels on the iPad Air Manager ? as I wish to use the ipad as an overhead panel, it mostly works but the Air Condition Packs, the Centre Fuel Pumps do not work properly, and all the FLT CTL buttons indicate that they are off on the iPad but the are on in the sim, I suspect this is because of the updates but I could be wrong - any solution towards a fully functioning overhead for the A32X on an iPad would be awesome.
The panel on the iPad come from the SimInnovation store and it is not made from the same instruments as in the Collection. These instruments are outdated and don't work with current FBW A32NX.
I have submitted the A32NX Collection to SimInnovations.
They will eventually put it on the Store and it will replace the outdated Overhead panel.
Then you will be able to use it with an iPad.
mach.8 wrote: ↑Thu Mar 27, 2025 11:18 am
is there a way to open the new panels on the iPad Air Manager ? as I wish to use the ipad as an overhead panel, it mostly works but the Air Condition Packs, the Centre Fuel Pumps do not work properly, and all the FLT CTL buttons indicate that they are off on the iPad but the are on in the sim, I suspect this is because of the updates but I could be wrong - any solution towards a fully functioning overhead for the A32X on an iPad would be awesome.
.../...
I have submitted the A32NX Collection to SimInnovations.
They will eventually put it on the Store and it will replace the outdated Overhead panel. Then you will be able to use it with an iPad.
Yves
To clarify, not directly with AM iPad APP, until it will be updated, as @Ralph stated. The only way to use the updated instruments when they will be in the Store, from an iPad, would be with Duet or similar, again until the AM iPad APP will be updated to include your updated collection (meaning the AM iPad update and release should occur after your updated collection will be available from the Store)
Hi im new to air manager in general and im scoping it out to see if it will meet my needs. Two questions
It makes me buy a license to use these. Is it because it uses features that the full version requires? I have no problems buying it but I wanted to make sure Air Manager is the right tool for me first.
Would these work with the default A320 Neo in FS2020?
