Copy Instrument to second panel

Latest Information on Sim Innovation's flagship product Air Manager

Moderators: russ, Ralph

Post Reply
Message
Author
OldAirman
Posts: 2
Joined: Sat Jan 06, 2024 12:20 pm

Copy Instrument to second panel

#1 Post by OldAirman »

Morning, Folks,
Sorry if this is a really basic question that I should be able to answer from the manual, FAQs, or forums, 'cause I be it's really basic, but I haven't found it.

It's really simple - I've got the Cessna 172P premium panel and I'd like to use two touch screens (Hannspree HT225) with the panel to the left of the radio stack on the 'left' monitor and the radio stack on the second (probably, later, with the third party GPS'.
So, I just want to move the radio stack - or, perhaps use the 'standard' 172 main panel on the left and just the radio stack from the Premium panel on the right.

Many thanks in advance,

Ron

OldAirman
Posts: 2
Joined: Sat Jan 06, 2024 12:20 pm

Re: Copy Instrument to second panel

#2 Post by OldAirman »

Well folks, I was a bit premature:

Just found the Bendix radio panels in the 'Add Instrument' section so I reckon I just need to create a new panel, put the appropriate comms stuff on it, and start it on the second screen.

Sorry to have wasted your time!

Kindest Regards,


Ron

Post Reply