Garmin G5 no LPV Vertical Guidance TDS GTN750xi

Discuss suspected bugs with other users and Sim Innovations Staff

Moderators: russ, Ralph

Post Reply
Message
Author
rangerz
Posts: 1
Joined: Fri Nov 24, 2023 11:24 pm
Location: NW Florida
Contact:

Garmin G5 no LPV Vertical Guidance TDS GTN750xi

#1 Post by rangerz »

Just setup G5 panel with the A2A Comanche running the TDS GTN750xi in gauge mode. Everything seems to work as expected except that vertical CDI is not working during LPV approaches. The vertical CDI bars appear but stay 'centered' independent of the actual vertical command offset as compared to the A2A HSI in the panel which displays correctly.

I am new to Air Manager - so perhaps there is a configuration I am missing but everything else is functioning as I understand it should.

Thanks!

User avatar
Ralph
Posts: 7910
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Garmin G5 no LPV Vertical Guidance TDS GTN750xi

#2 Post by Ralph »

I believe this was already discussed here on the forums that this does not work in MSFS. They don't set the variables to the correct value. This would have to be reported to Microsoft/Asobo.

Post Reply