As I stated in a previous post, I got a new computer because my first (also new) computer did not have a USB-C 3.1 port which is required to run the WINMAXIT monitor. I was able to return my first new computer with 2 days remaining in the return period and I built a second one with my son-in-law. The new one has USB-C 3.1 ports so the monitor came on and I could even move different windows over to it so it should run Air Manager fine. Except....
The screen originally looked like it was supposed to look, but the touchscreen did not work properly. At first, it operated as a mouse for the primary screen. In other words, when I touched the screen, I could see it moving on the other monitor. I then moved the computer into my office from the table where we built it and now it lights up and then goes dark, the same behavior as with the original computer, even though it worked right after we built the computer.
Does anyone have any experience with this problem? Thanks for any help.
Bob
Trouble with WINMAXIT monitor
-
bob@bobleonard.com
- Posts: 16
- Joined: Sat May 27, 2023 3:35 pm
Re: Trouble with WINMAXIT monitor
To follow up on the previous post:
First, I misspelled the name of the monitor; it is WIMAXIT.
Second, I left the room and when I returned, the screen was on, I could move windows over to it, and it still acts like a mouse for the other screen.
Go figure.
First, I misspelled the name of the monitor; it is WIMAXIT.
Second, I left the room and when I returned, the screen was on, I could move windows over to it, and it still acts like a mouse for the other screen.
Go figure.
