AP and AM Not Communicating
-
- Posts: 204
- Joined: Sat Jul 09, 2022 3:20 pm
Re: AP and AM Not Communicating
After I sent that, I uninstalled and reinstalled AP, then I activated the license (I'm not sure I did that before). But, alas, the AP doesn't play any instruments and AM won't recognize the sim unless I remove the firewall, something I am very hesitant to do. It shouldn't need it! Plus, there is no log file now! I know to push the instruments and I do it often. Sometimes I even copy the files manually (not today, though) - but the files are there.
Re: AP and AM Not Communicating
Regarding the connection to the simulator, did you try setting the IP address manually?
-
- Posts: 204
- Joined: Sat Jul 09, 2022 3:20 pm
Re: AP and AM Not Communicating
Ralph, I got the impression that if I provided the IP address, there was still something wrong with the communication between AM and Sim so I haven't tried it since. If that's an OK way of operating AM, I'll try it in the morning and report back.
In addition, just as I was turning off the sim (naturally), up popped an instrument! That was exciting, even though it was only about 2/3 of the instrument. Again will report back.
Thanks for the suggestions everyone!
Sparky
In addition, just as I was turning off the sim (naturally), up popped an instrument! That was exciting, even though it was only about 2/3 of the instrument. Again will report back.
Thanks for the suggestions everyone!
Sparky