touch screen click through
Re: touch screen click through
Ok so the touch itself is working because you get the yellow highlight in the correct spots when you touch. The knobster is working because the virtual knob is rotating. The only thing that is not working is the corresponding action in the sim. This either has to be a sim communication problem (plug-in or connection issue) or a non compatible aircraft or instrument. You seem to be suggesting that this aircraft has worked before so if that’s the case are you using the Xplane compatible G1000. The Nxi version does not work with Xplane. The main G1000 overlay works with both Xplane and MSFS. Could that be your problem?
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Re: touch screen click through
Thanks that was the problem, all works now
Gene
Gene
Re: touch screen click through
I have the same problem. I select Alt knob. The Bezel knob turns yellow. Knobster spins the bezel knob but the altitude doesn't change. I am flying the citation x on x-plane 12. flying the citation 550 on x-plane 11 works perfect. Is there a way to single step through the code to see what is happening? I'm wondering if a dataref or command has changed from xp11 to xp12.
Re: touch screen click through
In that case it is an issue in X-Plane 12. You might have to use a different command. You can find that with the datareftool.
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: touch screen click through
EDIT: Started a a new thread in requests.
Keith
Last edited by Keith Baxter on Wed Dec 28, 2022 6:19 pm, edited 1 time in total.
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
Re: touch screen click through
I don’t think you have the same problem at all. This was about using the incorrect G1000 overlay. those citations don’t use the G1000. So different instrument and different problem, more info required.Linkster wrote: ↑Wed Dec 28, 2022 2:53 pm I have the same problem. I select Alt knob. The Bezel knob turns yellow. Knobster spins the bezel knob but the altitude doesn't change. I am flying the citation x on x-plane 12. flying the citation 550 on x-plane 11 works perfect. Is there a way to single step through the code to see what is happening? I'm wondering if a dataref or command has changed from xp11 to xp12.
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Re: touch screen click through
I'm also a bit confused about the G1000 and the Citation X. I thought that maybe the topic changed to a different instrument and I didn't quite follow.
As Tony said, the Citation X does not have a G1000, so I'm not sure what you're trying to do... ?
As Tony said, the Citation X does not have a G1000, so I'm not sure what you're trying to do... ?
Re: touch screen click through
sorry. It's the c172 (g1000) . works on xp11 not xp12