Hi
I use a potiometer for the speed breaks but I don't know which dataref to use .any help please
ZIBO speed breaks
-
- Posts: 5340
- Joined: Thu Jul 27, 2017 12:22 am
Re: ZIBO speed breaks
As always, @bebe100, did you used latest DataRefTool ?
https://forums.x-plane.org/index.php?/f ... eaks-zibo/
https://forums.x-plane.org/index.php?/f ... eaks-zibo/
-
- Posts: 5340
- Joined: Thu Jul 27, 2017 12:22 am
Re: ZIBO speed breaks
The only one I'm seeing are the default :
-
- Posts: 5340
- Joined: Thu Jul 27, 2017 12:22 am
Re: ZIBO speed breaks
If using an analog potentiometern, refer to the "laminar/B738/flt_ctrls/speedbrake_lever" dataref, as already suggested by @crbascott here : https://forums.x-plane.org/index.php?/f ... nt=2429026
It looks like you've not answered to him before requesting here on the forums ... again, not sure how you're meaning is working @bebe100, sure many simmers with best willing will not be very helpful without your interaction !?
It looks like you've not answered to him before requesting here on the forums ... again, not sure how you're meaning is working @bebe100, sure many simmers with best willing will not be very helpful without your interaction !?
-
- Posts: 5340
- Joined: Thu Jul 27, 2017 12:22 am
Re: ZIBO speed breaks
Meanwhile, this is working properly :
Code: Select all
--====================================================================================
-- CHECK PURPOSE
--====================================================================================
function sb(val)
xpl_dataref_write("laminar/B738/flt_ctrls/speedbrake_lever","FLOAT",val)
end
hw_adc_input_add("HW_PORT_A0",sb)