Zibo motorized throttle

Working on a instrument project or just finished a project? Show it to others!

Moderators: russ, Ralph

Message
Author
bebe100
Posts: 59
Joined: Sat Sep 19, 2020 3:22 pm

Re: Zibo motorized throttle

#11 Post by bebe100 »

And code to desengage the A/T

bebe100
Posts: 59
Joined: Sat Sep 19, 2020 3:22 pm

Re: Zibo motorized throttle

#12 Post by bebe100 »

I'm using normal servos with high torque witch I attached with levers to the thrust levers creating a parallelogram.
To move the thrust levers I use a relay which cut the +5v of the servos.
The relay need a signal from N1 or from SPEED from MCP
The servos need a signal from x plane 11 (ZIBO) to match the thrust position (I don't know haw to do it)
I cut the +5v of the relay with button (desengage A/T) and so I can move thrust levers freely
In conclusion I need code for throttle (that's easy), code for servos to follow thrust levers, code for N1 and SPEED from MCP to activate the relays wich restore the +5v to the servos.
Please excuse me I'm not an expert
Thx anyway

Post Reply