Since a few days I do not get any indication on the instruments in the active panel, when running a flight with MSFS2020. The instruments are correctly loaded in the panel, I can activate the knob for the knobster (light goes on), but no indication on the relevant instruments (altimeter, speed etc). Also unable to dial in any value with the knobster like heading etc.
I am running the software on a PC with Windows 10. I am trying with both, the standard version as well as the Beta (which I have been actively using so far). No movement in both cases.
What could I do to make it functional again?
No Indication on Instruments
Re: No Indication on Instruments
Hi,
My first guess is there is no connection between Air Manager and your flight simulator.
Air Manager should say something like 'Connected to FS2020' on the bottom right if connection is okay.
If it is not, please look here for the most common issues that can cause Air Manager and your flight simulator not to connect:
https://siminnovations.com/wiki/index.p ... n_problems
Corjan
My first guess is there is no connection between Air Manager and your flight simulator.
Air Manager should say something like 'Connected to FS2020' on the bottom right if connection is okay.
If it is not, please look here for the most common issues that can cause Air Manager and your flight simulator not to connect:
https://siminnovations.com/wiki/index.p ... n_problems
Corjan
Re: No Indication on Instruments
Although showing a successful connection to the Sim didn‘t work.
Have re- installed software and plugins and now it’s working again. No clue what the reason for malfunction was
Have re- installed software and plugins and now it’s working again. No clue what the reason for malfunction was
Re: No Indication on Instruments
Did you try setting the IP address manually?