Hello.
Anyone know if it is possible to remove the knobs on the original Knobster?
Want to mount it flush with a metal sheet.
Regards
Hans
Remove Knobs
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Remove Knobs
Hi,
I do not know. But you are going to be asked what version because there were different assemblers.
Keith
I do not know. But you are going to be asked what version because there were different assemblers.
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
Re: Remove Knobs
Yes is the simple answer. The knobs and encoder are separate parts.
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Re: Remove Knobs
It's Knobster V2.
I know that such knobs are usually removable, but just want to check if they could for example be glued,
before I force them up.
Hans
I know that such knobs are usually removable, but just want to check if they could for example be glued,
before I force them up.
Hans
Re: Remove Knobs
Glued. I’ve never come across a knob that is glued to the encoder so I very much doubt it but the SI guys can answer that specifically.
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Re: Remove Knobs
Simple to remove,
Pop the cap off the small knob with your fingernail or small screwdriver. The small knob collet can then be loosened with a blade screwdriver. Slide off the small knob to reveal a 8mm?? collet nut on the large knob. It can be loosened with a socket or nut driver then slide off the shaft.
Chuck.
Pop the cap off the small knob with your fingernail or small screwdriver. The small knob collet can then be loosened with a blade screwdriver. Slide off the small knob to reveal a 8mm?? collet nut on the large knob. It can be loosened with a socket or nut driver then slide off the shaft.
Chuck.
Re: Remove Knobs
Great!
Thank's for your prompt help everyone.
Hans
Thank's for your prompt help everyone.
Hans