Instrument user properties not shown in Air Player 4 panel

Support for Air Player desktop.

Moderators: Ralph, russ

Post Reply
Message
Author
WillemijnL
Posts: 83
Joined: Sat Jan 30, 2016 1:14 pm

Instrument user properties not shown in Air Player 4 panel

#1 Post by WillemijnL »

In Air Manager 4 I have added two G1000 overlay instruments to an Air Player 4 panel. In the instrument settings you should be able to choose the position of the G1000 (captain PFD, co-pilot PFD or MFD). Unfortunately the user properties are not shown in the instrument settings, so I cannot change the position and it still defaults to captain PFD in both instruments. When adding the same instrument to an Air Manager 4 panel there is no problem and the properties are available as expected.

Air manager: home 4.0 beta 33
Air Player: 4.0 beta 33

User avatar
Ralph
Posts: 6625
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Instrument user properties not shown in Air Player 4 panel

#2 Post by Ralph »

Good one, I haven't tested that probably. Also good to check the hardware settings. Will do this week.

User avatar
Ralph
Posts: 6625
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Instrument user properties not shown in Air Player 4 panel

#3 Post by Ralph »

I gave it a try just now, and it works fine here. Are you sure you have the overlay selected and not the 'complete' G1000 from Crashtender?

Post Reply