Non-uniform scaling of instruments gets reset
Non-uniform scaling of instruments gets reset
I’ve spent hours to create a panel for Air Player on a Raspi. Since there is a problem with the screen resolution, I have to uncheck ‘Aspect ratio’ on the instruments and resize them in a non-proportional way. It ran well until a restart of Air Manager. As soon as I touch an instrument on the panel designer, almost (but not all) instruments resize to their standard 1:1 aspect ratio, ruining my panel in the process. Even a left click has the effect. It makes it unusable for me because for some strange reason I have to distort the instruments in the panel so that they are round on screen.
Re: Non-uniform scaling of instruments gets reset
I was able to work around the problem by
What remains is that whenever you touch a gauge that reaches beyond the margins of the screen, it snaps back into the screen. I have built a physical cockpit with gauge mask cutouts, with that it's necessary to place gauges so that they have negative X and Y coordinates (or reach over the canvas area). It's very annoying to have them snap back into the wrong place whenever you touch them with the mouse. I'll open a bug report for this.
- logging into the Raspi through ssh: per the instructions on this forum,
- place an empty file called "ssh" in the boot directory of the SD card, boot it up - then you have a running ssh server until next boot
Login from another computer and use raspi-config to make the ssh permanent (and change the password while you're here)
- place an empty file called "ssh" in the boot directory of the SD card, boot it up - then you have a running ssh server until next boot
What remains is that whenever you touch a gauge that reaches beyond the margins of the screen, it snaps back into the screen. I have built a physical cockpit with gauge mask cutouts, with that it's necessary to place gauges so that they have negative X and Y coordinates (or reach over the canvas area). It's very annoying to have them snap back into the wrong place whenever you touch them with the mouse. I'll open a bug report for this.