Page 1 of 1

Upgrade shows inevitable bug - panel creation

Posted: Thu Apr 22, 2021 1:54 pm
by Sling
Hi,

Great job with the 4.0 release. It seems like quite a few have been jumping on the upgrade path. I transitioned over today and all seems well apart from something that I noticed that may of been there a while. Some of my panels use instruments that I had previously set to non default aspect ratio by unticking the maintain aspect ratio and altering the sizing. When I re-create a panel in the hone tab from a panel created in create/edit the aspect ratio box on all these instruments is ticked by default during the panel creation and I lose all my custom sizing. It should respect the previously stored sizing which obviously needs to account for the aspect ratio setting.

Tony

Re: Upgrade shows inevitable bug - panel creation

Posted: Thu Apr 22, 2021 2:15 pm
by Corjan
Hi,


I don't think it is possible right now to configure the aspect ratio in the create/edit tab.
So when creating a panel in the home tab it defaults to aspect ratio enabled.


I will add this setting to the create/edit tab.

Corjan

Re: Upgrade shows inevitable bug - panel creation

Posted: Fri Apr 23, 2021 5:05 am
by Sling
Thanks Corjan.