Strange effect when moving instruments between screens

[solo86]

Hi
I'm running Air Manager v2.1.3 on Win10.
I have 2 Monitors.
Monitor 1 is a standard 1080 monitor whereas monitor 2 is a 4k TV/monitor.
In Display properties I have Monitor 2 above monitor 1
In Air Manager (on monitor 2 my main monitor) I have loaded the Cessna 172 panel.

As I move the instruments down the screen they
- start to appear on monitor 1
- then jump back up to monitor 2 as a smaller (higher resolution) image.
- I then move the instrument back down and it appears on Monitor 1 but if I move it near the bottom of monitor 1 it immediately jumps back up to monitor 2 the bigger size (1920x1080?).
- Then as I move it down to monitor 1 it appears on monitor 1 but as it nears the bottom of monitor 1 it then jumps again back up to monitor2 as a smaller (4k?) size.
- This is as far as it will go.

Has anyone experienced anything similar?
Can anyone give me some idea on what is happening here?
Thanks
Peter

[Ralph]

Why not place them on the screen you want and change it to the correct size? It probably has to do with the Windows scaling setting.
https://www.thurrott.com/windows/window ... ay-scaling

[solo86]

Is there a way in Air Manager to make it display on a chosen screen rather than just the main monitor?

[Ralph]

In 3.0 you can, not with 2.1.3. But you can manually adjust the X and Y in numbers. Have you looked at the scaling?

[solo86]

Hi Ralph
I looked at scaling and found the main monitor (4k) was set at 200% and the other monitor (1080p) at 100%.
So I changed the 4k monitor to 1080p and set the scaling to 100% so both monitors matched.
This didn't help at all and just made it so the instruments would only go half way down on the second monitor and then no further.
I may have to move to v3 when it is released. When is it going to be released?
I am participating in the v3 beta process but thats on a different pc. How do I download the latest beta version? to install on this pc?
Peter

[Ralph]

It's released on the 30th of November. All beta's are on the wiki: http://siminnovations.com/wiki/index.ph ... =Main_Page

[solo86]

Thanks Ralph

Not long to v3 release then.
Installed the v3 beta. Is there a Cessna 172 panel similar to that in v2? I couldn't see one and that's what I'm trying to use in v2.

Peter

[Ralph]

Click add panel and you'll see a list of panels.