Controlling Panel Visibility with Device Switch
-
- Posts: 60
- Joined: Tue Nov 20, 2018 9:34 pm
Controlling Panel Visibility with Device Switch
Hello! Is there a way to "Start Panel" using a simulator event command? For example, turning on instrument panel when the Avionics Switch is turned ON. I'm using FSX, btw.
thanks!
Dave
thanks!
Dave
Re: Controlling Panel Visibility with Device Switch
Has been discussed a couple of times. If you use the search function then you'll find some topics.
-
- Posts: 60
- Joined: Tue Nov 20, 2018 9:34 pm
Re: Controlling Panel Visibility with Device Switch
Thanks, Ralph. I searched for quite a while before deciding to post the question.
There is this post, but I don't see anything pertaining to my question: https://siminnovations.com/forums/viewt ... =14&t=3942
This one implies that it could be done maybe? https://siminnovations.com/forums/viewt ... f=9&t=3706
Is this what I'm looking for? https://siminnovations.com/forums/viewt ... =14&t=2978
Or this?: https://siminnovations.com/forums/viewt ... f=9&t=1328
There is this post, but I don't see anything pertaining to my question: https://siminnovations.com/forums/viewt ... =14&t=3942
This one implies that it could be done maybe? https://siminnovations.com/forums/viewt ... f=9&t=3706
Is this what I'm looking for? https://siminnovations.com/forums/viewt ... =14&t=2978
Or this?: https://siminnovations.com/forums/viewt ... f=9&t=1328
-
- Posts: 34
- Joined: Sat Nov 28, 2020 11:41 pm
- Location: Orlando, FL USA
Re: Controlling Panel Visibility with Device Switch
I have a three monitors (15" MFDs with 12 buttons) in my cockpit. Each screen has a black background screen that is visible. in front of all other layers. When the instrument senses that the master battery switch has been turned on, I turn off the visibility of the black screen.
Works great.
Works great.
Re: Controlling Panel Visibility with Device Switch
Start a panel no. Show/hide an already started panel yes.monkeysuncle wrote: ↑Mon Jun 28, 2021 5:15 pm Hello! Is there a way to "Start Panel" using a simulator event command? For example, turning on instrument panel when the Avionics Switch is turned ON. I'm using FSX, btw.
thanks!
Dave
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
-
- Posts: 60
- Joined: Tue Nov 20, 2018 9:34 pm
Re: Controlling Panel Visibility with Device Switch
navymustang, that's exactly what I want to do. Is there a post somewhere here that describes the process? I have panels that work great, and adding this feature would be really cool.
thanks in advance! Dave
thanks in advance! Dave
-
- Posts: 60
- Joined: Tue Nov 20, 2018 9:34 pm
Re: Controlling Panel Visibility with Device Switch
Sling, yes, "Show/Hide" is what I hope to add when I use my avionics master switch, or my battery master switch.
Thanks for the reply! Dave
Thanks for the reply! Dave
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Controlling Panel Visibility with Device Switch
Hi,
There are a number of ways to show a cold and dark panel then using viability start/show instruments.
For switching panels. Select "Start the panel automatically when switching aircraft"
Then to switch off the panel/AM use the helpers
event_subscribe(callback) and shut_down(type)
NOTE: You have to manually restart AM.
I am sure @Sling has done this many times. If not I would be surprised.
Keith
There are a number of ways to show a cold and dark panel then using viability start/show instruments.
For switching panels. Select "Start the panel automatically when switching aircraft"
Then to switch off the panel/AM use the helpers
event_subscribe(callback) and shut_down(type)
NOTE: You have to manually restart AM.
I am sure @Sling has done this many times. If not I would be surprised.
Keith
Last edited by Keith Baxter on Tue Jun 29, 2021 7:11 am, edited 1 time in total.
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Controlling Panel Visibility with Device Switch
@Corjan
It seems the "start panel automatically when switching aircraft" is broke in AM4 (beta40) Xplane
1) AM does not always start.
2) when changing aircraft the panel does not close. When one go's to manually close the panel then both AM and Xplane freeze. I have to go into task-manager and shut down both xplane and OpenJDK. I then have to do a system restart.
This works ok in AM3.7 and there are no issues. Not in AM4 (beta40)
I get the impression that all these issues are due to FS2020. AM4 was working extremely well before FS2020 came along. Now we disappointingly find host of issues popping up. AM3.7 does not have these issues because there is no FS2020.
I want the old AM4 back before FS2020 It was awesome. Please I beg you.
Keith
It seems the "start panel automatically when switching aircraft" is broke in AM4 (beta40) Xplane
1) AM does not always start.
2) when changing aircraft the panel does not close. When one go's to manually close the panel then both AM and Xplane freeze. I have to go into task-manager and shut down both xplane and OpenJDK. I then have to do a system restart.
This works ok in AM3.7 and there are no issues. Not in AM4 (beta40)
I get the impression that all these issues are due to FS2020. AM4 was working extremely well before FS2020 came along. Now we disappointingly find host of issues popping up. AM3.7 does not have these issues because there is no FS2020.
I want the old AM4 back before FS2020 It was awesome. Please I beg you.
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
Re: Controlling Panel Visibility with Device Switch
Then don't use the beta?