SimCoders X_Plane C172 REP RPM and Vertical Speed indicators not working

Peer support for Air Manager desktop users

Moderators: russ, Ralph

Post Reply
Message
Author
stantona@cox.net
Posts: 21
Joined: Thu Apr 16, 2020 1:15 am
Location: Dana Point

SimCoders X_Plane C172 REP RPM and Vertical Speed indicators not working

#1 Post by stantona@cox.net »

I have the X-Plane C172 SimCoders REP with all instruments working in the 3D cockpit. I also have the AM "Paid For" Cessna 172 instrument panel developed for the SimCoders. However, the Engine RPM and Vertical Speed indicators do not work. Both instrument's needles remain solid zero like they are not "connected" to anything. If I use one of the other AM C172 panels instead, all seems to be fine. Has anyone else noticed this?
Another question I have is that since one of the other C172 panels seems to run fine with the SimCoders REP C172 plane, what is different about the AM SimCoder panel that a separate panel needed to be developed (which has two instruments that don't work)?
Alex

stantona@cox.net
Posts: 21
Joined: Thu Apr 16, 2020 1:15 am
Location: Dana Point

Re: SimCoders X_Plane C172 REP RPM and Vertical Speed indicators not working

#2 Post by stantona@cox.net »

Please ignore. I think I found the problem. Thanks. Alex

Post Reply