There is no Knobster code, it is generic for each dial, switch, etc...
I have made a fix in 4.0, but in 3.x you'll have to live with it for now.
XP11 C172SP G1000 Switch Panel
-
- Posts: 21
- Joined: Thu Apr 16, 2020 1:15 am
- Location: Dana Point
Re: XP11 C172SP G1000 Switch Panel
Cessna 172 G1000 STBY BATT switch in the TEST position (down) does not turn on the green light unless the engine is running. This applies to both X-Plane 11 and X-Plane 12.
I don't see any mention of this in the forum. Am I the only one with this issue? Is there a fix?
Thanks,
Alex
I don't see any mention of this in the forum. Am I the only one with this issue? Is there a fix?
Thanks,
Alex
Re: XP11 C172SP G1000 Switch Panel
Alex,
I also see the behaviour where the G1000 STBY BATT switch in the TEST position (down) does not turn on the green light unless the engine is running. Thank-you for pointing this out as I hadn't had the time.
-ken
I also see the behaviour where the G1000 STBY BATT switch in the TEST position (down) does not turn on the green light unless the engine is running. Thank-you for pointing this out as I hadn't had the time.
-ken