Hello,
I have set up a touch monitor as second screen, running Air Manager with the AP panel for 737. All set up in Windows 10.
Touch is working on the monitor, but I can not get the knobs to work. The buttons of the AP panel works ok.
When I touch, hold and rotate the knobs, it is visually turning, but nothing else happen (no change of value). If I switch to mouse, I get the curved pointer and all works ok.
Guess I have missed something stupid, but can't understand what
Some knobs not working with Touch
Re: Some knobs not working with Touch
Sounds like you haven't set the input to touch.
Re: Some knobs not working with Touch
Input is set to touch and the switches (in the same panel) is working with touch. Just the knobs not changing values when turned.
Re: Some knobs not working with Touch
Touch for dials is fiddly without a knobster. You should be getting a blue highlight when you touch the dial, once that appears move your finger outwards from the middle of the knob and then rotate around the outside of the knob graphic. You'll soon get fed up with it and get yourself a knobster.
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Re: Some knobs not working with Touch
Thanks
Will test this tonight... And will check out knobster.
Will test this tonight... And will check out knobster.