@Sling I apologize if I came off as inconsiderate or unappreciative. I started with Russ's instructional video from Air Manager 3.5 (https://www.youtube.com/watch?v=p0qr0QwrUCk&t=64s), but I read a post that said his method was outdated. After conducting a search forum wide on RealityXP's 750/650 solution & integration with Air Manager, I found this post to be the most informative. You are correct, I was referencing the 650Xi.
I'm brand new to the sim world and intend to utilize XP11 + Air Manager + RealityXP to practice for my IFR rating. The closer that I can mimic my real life setup, the better pilot I'll become. Although short sighted, I was more interested in getting the basic sim completed to work on my IFR cert than customizing Air Manager.
I referenced your video: https://www.youtube.com/watch?v=HxA-LqqvNdM
I'm assuming the simplest way to create an overlay would be to take a 650 image, make a transparent cutout, and then make sure click through is selected for the panel. I'd then drag the RealityXP 650 behind the Air Manager instrument.
If that's completely incorrect, I'm assuming that that you'd point me here to create an instrument from scratch: https://siminnovations.com/wiki/index.p ... n_Tutorial
Thanks again for your reply.
GTN750/650 Overlays
- Keith Baxter
- Posts: 4674
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: GTN750/650 Overlays
Hi,
Here is where the treadmill starts.
https://www.forums.siminnovations.com/v ... 787#p22942
Keith
Here is where the treadmill starts.
https://www.forums.siminnovations.com/v ... 787#p22942
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card