diy knobster

Latest Information on Sim Innovation's flagship product Air Manager

Moderators: Ralph, russ

Message
Author
daveppluk
Posts: 23
Joined: Sat Nov 14, 2020 7:49 pm

diy knobster

#1 Post by daveppluk » Sun Apr 25, 2021 10:33 pm

i am building a knobster i am using the nano v3 and air manager 4 . air manager can see it but it will not flash when i tick the knobster box only when i tick the old bootloader box will it flash any ideas, is there a special type of nano i should purchase

User avatar
Ralph
Posts: 5088
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: diy knobster

#2 Post by Ralph » Mon Apr 26, 2021 9:40 am

Then you have an old bootloader. I'm not really sure what the problem is :)

daveppluk
Posts: 23
Joined: Sat Nov 14, 2020 7:49 pm

Re: diy knobster

#3 Post by daveppluk » Mon Apr 26, 2021 10:16 am

Good morning thank you fir your reply the problem is when I go to the flash screen in air manager it sees the nano but when I tick the knobster tab in the flash page it runs but gives me lubes if errors saying the programmer failed but if I click the bootloader tab instead in runs fine I need to hVe the knobster section to run ..if it's an old bootloader we're can I get the correct one fir the knobster tab to run correctly cheers

User avatar
Ralph
Posts: 5088
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: diy knobster

#4 Post by Ralph » Mon Apr 26, 2021 10:37 am

I'm not really sure what the problem with the old bootloader is? Just tick both old bootloader and Knobster.

daveppluk
Posts: 23
Joined: Sat Nov 14, 2020 7:49 pm

Re: diy knobster

#5 Post by daveppluk » Wed Apr 28, 2021 2:04 am

Thank you I will try this

daveppluk
Posts: 23
Joined: Sat Nov 14, 2020 7:49 pm

Re: diy knobster

#6 Post by daveppluk » Wed Apr 28, 2021 2:06 am

Once I get the nano to flash with both old bootloader and knobster ticked do o still need to load a sketch to the nano for it to work as a knobster in flight manager

User avatar
Ralph
Posts: 5088
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: diy knobster

#7 Post by Ralph » Wed Apr 28, 2021 3:17 am

No, you can just follow the guide on our wiki, no sketches.
https://siminnovations.com/wiki/index.p ... duino_Nano

daveppluk
Posts: 23
Joined: Sat Nov 14, 2020 7:49 pm

Re: diy knobster

#8 Post by daveppluk » Wed Apr 28, 2021 10:14 pm

Thanks Ralph I will try it

daveppluk
Posts: 23
Joined: Sat Nov 14, 2020 7:49 pm

Re: diy knobster

#9 Post by daveppluk » Fri Apr 30, 2021 5:01 pm

Hi Ralph after I flashed the nano with both boxes ticked knobster and bootloader it now show in devices as a knobster Chanel a but in settings it's not shown only mouse and touch are shown can you advise please

Thanks

Dave

User avatar
Sling
Posts: 4435
Joined: Mon Sep 11, 2017 2:37 pm
Contact:

Re: diy knobster

#10 Post by Sling » Fri Apr 30, 2021 11:10 pm

Dave,

The knobster selection is a separate drop down selection in the home tab individual panel settings.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests