HW-TRIM is in Reverse

Everything about Flight Illusion hardware in combination with Air Manager or Gstep.

Moderators: Ralph, russ

Post Reply
Message
Author
aviatorGIO
Posts: 11
Joined: Tue Jun 08, 2021 10:50 pm

HW-TRIM is in Reverse

#1 Post by aviatorGIO » Tue Jun 08, 2021 11:11 pm

Hi! I'm having some trouble with the FI Motorized Trim Wheel (elevator trim). Unfortunately in Air Manager 4 is triming the oposite way. Is there any chanse to change the direction of travel?
Thanks!

User avatar
Ralph
Posts: 5164
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: HW-TRIM is in Reverse

#2 Post by Ralph » Wed Jun 09, 2021 6:09 am

Haven't heard that one before. Are you 100% sure? Rotating the wheel upwards should make you pitch down.

aviatorGIO
Posts: 11
Joined: Tue Jun 08, 2021 10:50 pm

Re: HW-TRIM is in Reverse

#3 Post by aviatorGIO » Wed Jun 09, 2021 8:30 am

100% Sure it trims the other way. Rotating up will trim NOSE UP for some reason. With the old G-Step manual trim was working correct with an exception of when the AP was engaged. (X-plane11)

aviatorGIO
Posts: 11
Joined: Tue Jun 08, 2021 10:50 pm

Re: HW-TRIM is in Reverse

#4 Post by aviatorGIO » Wed Jun 09, 2021 1:42 pm

Fixed on the same way Turn indicator from FI did.

line 41
gbl_hw_trim = var_cap(value * -1, -1, 1)

:D

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest