GSA-010 I/O MODULE Analog NOT RECOGNISED
-
- Posts: 11
- Joined: Tue Jun 08, 2021 10:50 pm
GSA-010 I/O MODULE Analog NOT RECOGNISED
GSA-010 I/O MODULE Analogue Inputs are not Recognised by Air Manager 4. Wiring is correct and it works with the G-Step software. CHANELL selected is ''A'', as the GSA-010. Just to confirm that all the switches are working normally, only the analogue inputs are not recognised. Any workaround available or I m doing something wrong ?
-
- Posts: 11
- Joined: Tue Jun 08, 2021 10:50 pm
Re: GSA-010 I/O MODULE Analog NOT RECOGNISED
Any help please regarding that matter! NO Axis from the GSA-010 is recognised. Im getting the error ''logic.lua:24 Failed to bind hardware id's to connected hardware''
COM5 is connected. Channel A is selected in the Air Manager App. ALL BUTTONS/SWITCHES are working normaly.
COM5 is connected. Channel A is selected in the Air Manager App. ALL BUTTONS/SWITCHES are working normaly.
Re: GSA-010 I/O MODULE Analog NOT RECOGNISED
Please don't post such issues on the forums, we have a support ticket system for this:
https://www.siminnovations.com/support-tickets
https://www.siminnovations.com/support-tickets
Re: GSA-010 I/O MODULE Analog NOT RECOGNISED
Hi,
There is a fault in Air Manager /G-Step.
It has been fixed. In a couple of moments I will upload a new Air Manager BETA:
http://siminnovations.com/wiki/index.ph ... sktop_BETA
Sorry for the trouble and please let me know if this helped,
Corjan
There is a fault in Air Manager /G-Step.
It has been fixed. In a couple of moments I will upload a new Air Manager BETA:
http://siminnovations.com/wiki/index.ph ... sktop_BETA
Sorry for the trouble and please let me know if this helped,
Corjan