Hi all,
I am a new user of the AirPlayer for Raspberry. Actually I succeed to connect a common flat screen (PC desktop type) using the Pi2 HDMI port output. I see my gauge(s) it is ok.
I am wondering if we can connect a dedicated Pi LCD flat screen (2.8" or 3.5" for example) to display any gauge without having to use a connected desktop screen.
It could be a more compact solution to place an external gauge somewhere in the cabin.
Thanks
Bye
Which screen type can I connect to the Raspberry ?
Re: Which screen type can I connect to the Raspberry ?
It's probably possible, but you will have to do some manual configuration to get the panel working. Which is probably described at the webpage of the manufacturer.
Re: Which screen type can I connect to the Raspberry ?
Hi
There are some standard 3.5", 5", 6", 7" and 10.1" HDMI screen made for the Raspberry that should work.
https://www.amazon.fr/10-1inch-HDMI-LCD ... B01CU7VX5Q
The only question is about the max resolution of these screen, ranging from 480x320 up to 1024x600 for the max.
Will Air Player be handling such a low resolution?
Jacques
There are some standard 3.5", 5", 6", 7" and 10.1" HDMI screen made for the Raspberry that should work.
https://www.amazon.fr/10-1inch-HDMI-LCD ... B01CU7VX5Q
The only question is about the max resolution of these screen, ranging from 480x320 up to 1024x600 for the max.
Will Air Player be handling such a low resolution?
Jacques
My YouTube Chanel on the A320 (Real SOPs by an Airline Pilot IRL):
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
Re: Which screen type can I connect to the Raspberry ?
It handless every resolution
Re: Which screen type can I connect to the Raspberry ?
Thanks. Good to know.
One thing I remarked during my searches is that such TFT screens are using the GPIO slot... thus we have no possibility to have access to the unused GPIO pins to add switches or LEDs...
Yes it will be best to use a "normal" HDMI small screen. Thanks for the linkJackZ wrote: ↑Fri Jan 05, 2018 6:28 pm Hi
There are some standard 3.5", 5", 6", 7" and 10.1" HDMI screen made for the Raspberry that should work.
https://www.amazon.fr/10-1inch-HDMI-LCD ... B01CU7VX5Q
The only question is about the max resolution of these screen, ranging from 480x320 up to 1024x600 for the max.
Will Air Player be handling such a low resolution?
Jacques
Bye
Re: Which screen type can I connect to the Raspberry ?
can the touch function of this type of screen be used. If true what procedure do I need to do to activate it? I have tried LCD.show, enabled SPI and installed libinput this failed to enable touch. Or do I have to use this type with direct serial input
-
- Posts: 5339
- Joined: Thu Jul 27, 2017 12:22 am
Re: Which screen type can I connect to the Raspberry ?
If not used with a Raspberry, Touch input should be enabled in Settings tab, or per panel in the Panels tab, starting with the last versions os AM 3.5 Beta (at least Beta 30 and up if i remember well)
I can't say for Raspberry, if the touch input is, or not, forwarded on another bus type than USB
i only remember having already used a 7 inch touch screen, with an onboard direct link through a flat orange flexible cable (native touch logic without specific activation need)
and the video through HDMI
so, not sure it would work in AM the expected way
https://www.itead.cc/blog/how-to-use-ne ... spberry-pi
https://www.itead.cc/nextion-nx8048t070.html
https://www.itead.cc/wiki/Nextion_HMI_Solution
Gilles
I can't say for Raspberry, if the touch input is, or not, forwarded on another bus type than USB
i only remember having already used a 7 inch touch screen, with an onboard direct link through a flat orange flexible cable (native touch logic without specific activation need)
and the video through HDMI
so, not sure it would work in AM the expected way
https://www.itead.cc/blog/how-to-use-ne ... spberry-pi
https://www.itead.cc/nextion-nx8048t070.html
https://www.itead.cc/wiki/Nextion_HMI_Solution
Gilles
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Which screen type can I connect to the Raspberry ?
Whilst I see this a a topic. I have been trying for nearly one year to get the touch screen on my 10.1 to work.
It issue is that the touch screen driver needs to be installed on the SD card. There is no way that I know how to add the driver to the AM image.
This is the screen I have.
https://www.waveshare.com/wiki/10.1inch ... ser_Manual
Keith
EDIT:
If I install the driver on a a rasbian/ubantu image the touch screen works perfectly.
It issue is that the touch screen driver needs to be installed on the SD card. There is no way that I know how to add the driver to the AM image.
This is the screen I have.
https://www.waveshare.com/wiki/10.1inch ... ser_Manual
Keith
EDIT:
If I install the driver on a a rasbian/ubantu image the touch screen works perfectly.
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
Re: Which screen type can I connect to the Raspberry ?
Keith,
I feel your pain. I have also had no luck with a usb touch screen that’s plug n play on windows.
I think it’s something that needs addressing, after all one of the big benefits of AM is the touch support. It’s just the Rpi touch support that’s problematic.
Good to have you back.
Tony
I feel your pain. I have also had no luck with a usb touch screen that’s plug n play on windows.
I think it’s something that needs addressing, after all one of the big benefits of AM is the touch support. It’s just the Rpi touch support that’s problematic.
Good to have you back.
Tony
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Which screen type can I connect to the Raspberry ?
Thank you Tony.Sling wrote: ↑Sun Feb 10, 2019 12:18 pm Keith,
I feel your pain. I have also had no luck with a usb touch screen that’s plug n play on windows.
I think it’s something that needs addressing, after all one of the big benefits of AM is the touch support. It’s just the Rpi touch support that’s problematic.
Good to have you back.
Tony
I will slowly try and work my way back. I see a lot has been done during my absence.
The wave 10.1 would make a lovely tablet for Gilles instrument.
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card