Hi,
The days are slowly getting colder, so I've been busy improving the instruments I developed for Flightfactor's A350xwb. And also adapt them to the Airmanager 4.0. I develop the instruments on the PC and then use them on the Raspberry Pi.
But a problem arises with version 4.0: The files on the RPi are not updated. It doesn't work when clicking on "Show" and "Hide", it doesn't work even after deleting the panel and the instruments on the Air Manager. The feature "Automatically update instruments and panels" is enabled on Air Manager.
I have now already 2x the RPi Airplayer (Etch the Rpi-SD-Card with Image) set up again. Then the instruments are transferred once. But no update is possible.
Any help is welcome.
Greetings
Robert
Instruments are not updated
Re: Instruments are not updated
If you're talking about your own instruments: http://siminnovations.com/wiki/index.ph ... Air_Player
-
- Posts: 9
- Joined: Thu Dec 03, 2020 5:48 pm
Re: Instruments are not updated
Hi Ralph,
thanks for filling this knowledge gap. I had already read the passage on the Wiki page, but it did not reach my brain. But it is also a bit tricky, the switch button on Airplayer you do not see right away, and the German translation of the push command is not happy with "Drücken". "Senden" would be the better translation.
Greetings
Robert
thanks for filling this knowledge gap. I had already read the passage on the Wiki page, but it did not reach my brain. But it is also a bit tricky, the switch button on Airplayer you do not see right away, and the German translation of the push command is not happy with "Drücken". "Senden" would be the better translation.
Greetings
Robert