Newbie Question: Do we need AirPlayer on Pi to connect GPIO?

Support for connecting hardware to the Raspberry Pi GPIO

Moderators: Ralph, russ

Post Reply
Message
Author
pfactor
Posts: 7
Joined: Tue May 28, 2019 5:46 pm

Newbie Question: Do we need AirPlayer on Pi to connect GPIO?

#1 Post by pfactor » Wed Jun 12, 2019 12:29 am

I'm a total newbie to AirManager, but very familiar with Arduinos, RaspberryPi, and other hardware. In order to connect things like buttons, encoders, etc. to a RaspberryPi and use them in AirManager running on a Windows PC, would I need AirPlayer on the RaspberryPi?

If not, how would AirManager on the PC recognize the Pi?

User avatar
Sling
Posts: 4432
Joined: Mon Sep 11, 2017 2:37 pm
Contact:

Re: Newbie Question: Do we need AirPlayer on Pi to connect GPIO?

#2 Post by Sling » Wed Jun 12, 2019 8:07 am

Welcome,

Yep, you need Air player to communicate with Air Manager and to service the connected IO. If you want to try out the hardware without AP you can plug an Arduino directly into the AM machine.

Tony

pfactor
Posts: 7
Joined: Tue May 28, 2019 5:46 pm

Re: Newbie Question: Do we need AirPlayer on Pi to connect GPIO?

#3 Post by pfactor » Wed Jun 12, 2019 8:49 pm

Thank you, Tony. I'll give the Arduino/AM route a try. It's hard to justify dropping an extra 30 Euros for AP on the Pi when I'm just "playing around" :)

Charath

ZSN
Posts: 2
Joined: Sat Jul 25, 2020 2:58 pm

Re: Newbie Question: Do we need AirPlayer on Pi to connect GPIO?

#4 Post by ZSN » Sun Jul 26, 2020 4:13 pm

Has anyone managed to do this - I cannot seem to access the GPIO ports on the PI using AIrplayer.

If so please share how i can turn and led on or use a press button

User avatar
Sling
Posts: 4432
Joined: Mon Sep 11, 2017 2:37 pm
Contact:

Re: Newbie Question: Do we need AirPlayer on Pi to connect GPIO?

#5 Post by Sling » Mon Jul 27, 2020 2:45 am

Depends what ‘this’ is exactly. The instrument containing the hardware code needs to be loaded to the AP machine using AM.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest