Not a big deal, but I noticed my Arduino Micro keeps running (light stays lit) after I close a panel. When the panel is up, it blinks as it should. Only way I can apparently reset the Arduino is by closing AirManager and restarting so it appears its still trying to communicate with a nonexistent panel. restarting a panel seems to leave AirManager doing whatever it was trying to do as well as access the panel and switch hardware.
John
Arduno stays active
Re: Arduno stays active
You can use the event_subscribe() function to set the Pin states upon panel closing if that’s what you need. If you mean the boards own led then it will probably still remain because the board is still connected to Air Manager.
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D