Arduino Pro Micro
-
- Posts: 24
- Joined: Tue Nov 03, 2020 6:02 pm
Re: Arduino Pro Micro
Sorry, try this https://m.aliexpress.com/item/33052809 ... 160elNElWY
Re: Arduino Pro Micro
Still difficult to read, (VERY large text and graphics) but, if you are referring to the 'guitar' type aluminium dual concentric knobs.. I have plenty of those ! - I also have exactly the same encoders. The dual knobs do not look like the ones in your images though ?ExPatAviator wrote: ↑Wed May 05, 2021 12:54 pm Sorry, try this https://m.aliexpress.com/item/33052809 ... 160elNElWY
Joe. (slight baffled - but, not unusual.............................................)
Joe. CISSP, MSc.
Re: Arduino Pro Micro
Thanks for the input. I have had spacedesk since the early betas. It is really good, but tends to hammer the main PC that outputs to the android device. It has potential though.ExPatAviator wrote: ↑Wed May 05, 2021 12:32 pm I don’t see any reason why you couldn’t use android with something like spacedesk. If I had only wanted the GTN I’d have used an iPad mini
Joe. CISSP, MSc.
-
- Posts: 24
- Joined: Tue Nov 03, 2020 6:02 pm
Re: Arduino Pro Micro
They are rotary encoders so not potentiometers like guitars I suppose.
How about this link
https://octopart.com/ec11ebb24c03-alps-757529
How about this link
https://octopart.com/ec11ebb24c03-alps-757529
-
- Posts: 24
- Joined: Tue Nov 03, 2020 6:02 pm
Re: Arduino Pro Micro
I used to find that but recently xplane doesn’t seem to take such a hit when I use Duet or spacedesk. Perhaps since the move to Vulcan my CPU is doing a bit lessjph wrote: ↑Wed May 05, 2021 1:03 pmThanks for the input. I have had spacedesk since the early betas. It is really good, but tends to hammer the main PC that outputs to the android device. It has potential though.ExPatAviator wrote: ↑Wed May 05, 2021 12:32 pm I don’t see any reason why you couldn’t use android with something like spacedesk. If I had only wanted the GTN I’d have used an iPad mini
Re: Arduino Pro Micro
HiExPatAviator wrote: ↑Wed May 05, 2021 1:05 pm They are rotary encoders so not potentiometers like guitars I suppose.
How about this link
https://octopart.com/ec11ebb24c03-alps-757529
Sorry, don't understand what you mean ? .. a dual concentric knob is a dual concentric knob... it is of absolutely no consequence if it is a potentiometer or an encoder. The 'guitar' type dual concentric knobs on the page that you linked to are not the type you show ?
I didn't ask for the link to the encoders, I have stacks of them, I asked for the link to the dual concentric knobs that you use ?
Cheers, Joe
Joe. CISSP, MSc.
Re: Arduino Pro Micro
Hi, it was more the OS, but, I haven't tried spacedesk for a while so will give it another shot.. thanks.ExPatAviator wrote: ↑Wed May 05, 2021 1:06 pmI used to find that but recently xplane doesn’t seem to take such a hit when I use Duet or spacedesk. Perhaps since the move to Vulcan my CPU is doing a bit lessjph wrote: ↑Wed May 05, 2021 1:03 pmThanks for the input. I have had spacedesk since the early betas. It is really good, but tends to hammer the main PC that outputs to the android device. It has potential though.ExPatAviator wrote: ↑Wed May 05, 2021 12:32 pm I don’t see any reason why you couldn’t use android with something like spacedesk. If I had only wanted the GTN I’d have used an iPad mini
Joe. CISSP, MSc.
-
- Posts: 24
- Joined: Tue Nov 03, 2020 6:02 pm
Re: Arduino Pro Micro
Sorry! I misunderstood!jph wrote: ↑Wed May 05, 2021 1:10 pmHiExPatAviator wrote: ↑Wed May 05, 2021 1:05 pm They are rotary encoders so not potentiometers like guitars I suppose.
How about this link
https://octopart.com/ec11ebb24c03-alps-757529
Sorry, don't understand what you mean ? .. a dual concentric knob is a dual concentric knob... it is of absolutely no consequence if it is a potentiometer or an encoder. The 'guitar' type dual concentric knobs on the page that you linked to are not the type you show ?
I didn't ask for the link to the encoders, I have stacks of them, I asked for the link to the dual concentric knobs that you use ?
Cheers, Joe
I designed and 3D printed those myself. Happy to send you the STL if you would like with the caveat I’m a 3D modeling amateur !
Re: Arduino Pro Micro
AH, excellent, sorry for the confusion. Yes please send the STL if that's ok ?. Hardware ? - I am totally fine with - 2D CAD, no worries, 3D cad - yikes - !! I think I am too old at 63.... I just cant get my head around it - or maybe thingyverse etc makes me lazyExPatAviator wrote: ↑Wed May 05, 2021 1:14 pmSorry! I misunderstood!jph wrote: ↑Wed May 05, 2021 1:10 pmHiExPatAviator wrote: ↑Wed May 05, 2021 1:05 pm They are rotary encoders so not potentiometers like guitars I suppose.
How about this link
https://octopart.com/ec11ebb24c03-alps-757529
Sorry, don't understand what you mean ? .. a dual concentric knob is a dual concentric knob... it is of absolutely no consequence if it is a potentiometer or an encoder. The 'guitar' type dual concentric knobs on the page that you linked to are not the type you show ?
I didn't ask for the link to the encoders, I have stacks of them, I asked for the link to the dual concentric knobs that you use ?
Cheers, Joe
I designed and 3D printed those myself. Happy to send you the STL if you would like with the caveat I’m a 3D modeling amateur !
Joe. CISSP, MSc.
-
- Posts: 24
- Joined: Tue Nov 03, 2020 6:02 pm
Re: Arduino Pro Micro
Here you go! https://www.thingiverse.com/thing:4850176/filesjph wrote: ↑Wed May 05, 2021 1:28 pmAH, excellent, sorry for the confusion. Yes please send the STL if that's ok ?. Hardware ? - I am totally fine with - 2D CAD, no worries, 3D cad - yikes - !! I think I am too old at 63.... I just cant get my head around it - or maybe thingyverse etc makes me lazyExPatAviator wrote: ↑Wed May 05, 2021 1:14 pmSorry! I misunderstood!jph wrote: ↑Wed May 05, 2021 1:10 pm
Hi
Sorry, don't understand what you mean ? .. a dual concentric knob is a dual concentric knob... it is of absolutely no consequence if it is a potentiometer or an encoder. The 'guitar' type dual concentric knobs on the page that you linked to are not the type you show ?
I didn't ask for the link to the encoders, I have stacks of them, I asked for the link to the dual concentric knobs that you use ?
Cheers, Joe
I designed and 3D printed those myself. Happy to send you the STL if you would like with the caveat I’m a 3D modeling amateur !