Arduino connected but not working after V4 upgrade
Re: Arduino connected but not working after V4 upgrade
I hear you saying the binding messages mean nothing but my hardware connected to air player doesn’t work unless I wait to show the screen until after the arduino shows as connected.
Re: Arduino connected but not working after V4 upgrade
Hi,
Yeah, that is because the fix I made for Air Manager is not yet pushed to Air Player applications.
I will push this fix to all applications once we have gathered a couple of fixes. Will probably release in about a month from now.
Corjan
Yeah, that is because the fix I made for Air Manager is not yet pushed to Air Player applications.
I will push this fix to all applications once we have gathered a couple of fixes. Will probably release in about a month from now.
Corjan
-
- Posts: 30
- Joined: Wed Dec 25, 2019 8:55 pm
Re: Arduino connected but not working after V4 upgrade
Arduino mega 2560 (no clone) attached to pc running air manager connects in 15 sec.
Need to leave it this way for at least 2 minutes before running a custom panel or
testing the instruments in the "edit/create" tab. Otherwise binding fails. When Arduino
is connected to the pc running air player, it is also recognized in 15 sec / shows under the air player
device tab. Instruments imported to a panel created under the air player tab do not work. Same scripts/
instruments.
Air manager and air player versions 4.0.1 Both new custom pcs high end processors. Arduino connected
directly to usb 2.0- no hub. Seems to work better with 2.0 rather than 3.0
Any thoughts on why the Arduino won't work on the pc running air player? There is a second knobster
on the air player pc which works fine. Thanks
Need to leave it this way for at least 2 minutes before running a custom panel or
testing the instruments in the "edit/create" tab. Otherwise binding fails. When Arduino
is connected to the pc running air player, it is also recognized in 15 sec / shows under the air player
device tab. Instruments imported to a panel created under the air player tab do not work. Same scripts/
instruments.
Air manager and air player versions 4.0.1 Both new custom pcs high end processors. Arduino connected
directly to usb 2.0- no hub. Seems to work better with 2.0 rather than 3.0
Any thoughts on why the Arduino won't work on the pc running air player? There is a second knobster
on the air player pc which works fine. Thanks
Re: Arduino connected but not working after V4 upgrade
Have you flashed the Arduino with the latest AM build?
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
-
- Posts: 30
- Joined: Wed Dec 25, 2019 8:55 pm
Re: Arduino connected but not working after V4 upgrade
Yes. Multiple times. Is there a separate flashing for an Arduino to be used under air player as opposed to Air Manager ? I even have a second separate simulator running the same version of air manager with the same Arduino , works fine. Is there a special setting I need to use to make the Arduino run under air player? Since I used it to control the overhead zibo premium panel I run the panel of the instruments I created but do not display the Arduino panel. Also is it possible to run the create/ edit tab with a panel created under air player? These instruments are physical knobs and switches. I use the suggested lua scripts and not the pre-made hardware instruments.