This is my simple code:
Code: Select all
function buttonPressedCallback(row,column)
print("Pressed at " .. row .. ", " .. column)
end
hw_button_array_add("My keypad", 6,7, buttonPressedCallback)
Code: Select all
function buttonPressedCallback(row,column)
print("Pressed at " .. row .. ", " .. column)
end
hw_button_array_add("My keypad", 6,7, buttonPressedCallback)
Hi,Rizzardjo wrote: ↑Fri Dec 11, 2020 10:08 am I tried both with Air Manager 3.7.10 and with the new beta version. This looks very strange! My Arduino was connected on COM13 in Channel D. I tried also to change COM port, Arduino channel, reflashing arduino and using another arduino board, but nothing
This is a link to a more detailed topic viewtopic.php?f=35&t=3997
Sorry for splitting in multiple thread, but i'm new in this forum and i don't know how remove a topic. Anyway yes, i tried with only jumper, but the problem is the same. I tried this in four different arduino boards, but nothing This is a lot strange because using default arduino ide with keypad library all works fine.Sling wrote: ↑Fri Dec 11, 2020 1:54 pm Yes I saw the other thread. It’s best not to split the same problem across different threads. I tested with just a jumper wire and only the press callback just as in your original example. I can only assume your Arduino is either a clone that is giving spurious results or just faulty. Did you try without the button matrix attached and just a jumper wire directly inserted between the Arduino I/O sockets.
I flashed Arduino several times from Air Manager interface. Is there another way to get an updated firmware?
Hi,