Is airmanager compatible with arduino, and a 1602 display?
Sounds to me like I’ve seen somewhere that was.
I want to do an autopilot with this display.
Airmanager and LCD1602
Re: Airmanager and LCD1602
I answer to myself. I have seen that there are a couple of threads with the name of HD44780.
Re: Airmanager and LCD1602
HI Fermin
Some links that may help ?
https://siminnovations.com/wiki/index.p ... isplay_add
https://siminnovations.com/wiki/index.p ... er_display
Joe
Some links that may help ?
https://siminnovations.com/wiki/index.p ... isplay_add
https://siminnovations.com/wiki/index.p ... er_display
Joe
Joe. CISSP, MSc.
Re: Airmanager and LCD1602
I checked the links above, but I can’t get the display to show anything with Airmanager.
This code shows nothing in AirManager:
-- ARDUINO MEGA 2560 Connections
-- Channel A
--HD44780 - RS RS (Pin 13)
--HD44780 - Enable Enable (Pin 12)
--HD44780 - Data 4 Data 4 (Pin 11)
--HD44780 - Data 5 Data 5 (Pin 10)
--HD44780 - Data 6 Data 6 (Pin 9)
--HD44780 - Data 7 Data 7 (Pin 8)
-- HD44780 2 x 16 Character Display.
display_chr_radios = hw_chr_display_add("radio_display", "HD44780", 2, 16)
-- SImple display on each line of the HD44780 Display
hw_chr_display_set_text(display_chr_radios, 0, "1234567890ABCDEF")
hw_chr_display_set_text(display_chr_radios, 1, "1234567890ABCDEF")
But this code on Arduino does work:
/* Conexiones
PIN 13 - (RS)
PIN 7 - (R/W)
PIN 12 - (Enable)
PIN 11 - (D4)
PIN 10 - (D5)
PIN 9 - (D6)
PIN 8 - (D7)
*/
#include <LiquidCrystal.h>
LiquidCrystal lcd(13, 7, 12, 11, 10, 9, 8); //(RS, RW, E, D4, D5, D6, D7)
void setup()
{
lcd.begin(16, 2); // Inicia un LCD 16x02 (columnas,fila)
lcd.setCursor(0, 0); // Pone el cursor en las coordenadas (0,0)
lcd.print("1234567890ABCDEF"); // Escribe el LCD
lcd.setCursor(0, 1); // Ponemos el cursor en la segunda Fila
lcd.print("1234567890ABCDEF"); // Escribe el LCD
}
void loop()
{
}
The only difference between Arduino and Airmanager is that at Arduino I connected the PIN7 to R/W.
Somebody can help me?
Thanks in advance.
This code shows nothing in AirManager:
-- ARDUINO MEGA 2560 Connections
-- Channel A
--HD44780 - RS RS (Pin 13)
--HD44780 - Enable Enable (Pin 12)
--HD44780 - Data 4 Data 4 (Pin 11)
--HD44780 - Data 5 Data 5 (Pin 10)
--HD44780 - Data 6 Data 6 (Pin 9)
--HD44780 - Data 7 Data 7 (Pin 8)
-- HD44780 2 x 16 Character Display.
display_chr_radios = hw_chr_display_add("radio_display", "HD44780", 2, 16)
-- SImple display on each line of the HD44780 Display
hw_chr_display_set_text(display_chr_radios, 0, "1234567890ABCDEF")
hw_chr_display_set_text(display_chr_radios, 1, "1234567890ABCDEF")
But this code on Arduino does work:
/* Conexiones
PIN 13 - (RS)
PIN 7 - (R/W)
PIN 12 - (Enable)
PIN 11 - (D4)
PIN 10 - (D5)
PIN 9 - (D6)
PIN 8 - (D7)
*/
#include <LiquidCrystal.h>
LiquidCrystal lcd(13, 7, 12, 11, 10, 9, 8); //(RS, RW, E, D4, D5, D6, D7)
void setup()
{
lcd.begin(16, 2); // Inicia un LCD 16x02 (columnas,fila)
lcd.setCursor(0, 0); // Pone el cursor en las coordenadas (0,0)
lcd.print("1234567890ABCDEF"); // Escribe el LCD
lcd.setCursor(0, 1); // Ponemos el cursor en la segunda Fila
lcd.print("1234567890ABCDEF"); // Escribe el LCD
}
void loop()
{
}
The only difference between Arduino and Airmanager is that at Arduino I connected the PIN7 to R/W.
Somebody can help me?
Thanks in advance.
Re: Airmanager and LCD1602
My YouTube Chanel on the A320 (Real SOPs by an Airline Pilot IRL):
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
https://www.youtube.com/playlist?list=P ... 0Q6SBASRqJ
Re: Airmanager and LCD1602
Fermin,
Your code looks ok as a first up test to see how it works. What did you do with R/W for the AM test. If you left it disconnected this is why nothing is working. It needs to connect from the LCD to ground (write). I also assume you have any other connections such as power, brightness control the same during both tests.
Tony
Your code looks ok as a first up test to see how it works. What did you do with R/W for the AM test. If you left it disconnected this is why nothing is working. It needs to connect from the LCD to ground (write). I also assume you have any other connections such as power, brightness control the same during both tests.
Tony
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Re: Airmanager and LCD1602
Thanks Sling, that was the problem.
I had left without connecting the R/W.
Now it works.
I had left without connecting the R/W.
Now it works.
Re: Airmanager and LCD1602
No worries. Glad you got it sorted.
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D